PMC-TESTER TEE61
1 / 2Páginas

Advantages & Savings • Automatic full testing of the on-engine components within minutes can be performed in Line Maintenance, Test Cell or Workshop under all desired temperature conditions with simultaneous printout / display. • Quick and accurate software delivered results - especially when under A/C Turn-Round pressure - that provides a fast analysis / solution to the problem. • NO FAULT FOUND scenario is reduced. • The automatic test sequence may be interrupted by the operator manually at any time. Subsequently, if required, one or more tests may be repeated or completed. • Engineering and Trend Monitoring of Components: This can be done when the full automatic check is performed, understandably, over a period of time. Why not complete a full check each time (a printout is always done) instead of troubleshooting manually since this neither provides the trend monitoring possibility nor would it be as swift. Regelungs- und Messtechnik • Dynamic Test Systems GUTENBERGSTRASSE 27 D-21465 REINBEK/ HAMBURG GERMANY

PMC and Related Component Test (TEST SET-UP + CABLE CONNECTION) The RMS Power Management Control Tester TEE61 is compatible to CFM56-3 engines (or CFM56-2). It is microprocessor based and is designed to provide a quick GO / NO-GO check of the PMC. It houses its own power supply, digital read-out, printer, cables and - for the PLA schedule test - a dynamic pressure / temperature check capability. ENGINE SENSORS FLIGHT COMPARTMENT CONTROLS & INDICATORS PRESSURE LINE PLA Gain Adjustment Test (TEST SET-UP + CABLE CONNECTION) ENGINE SENSORS FLIGHT COMPARTMENT CONTROLS & INDICATORS RECOMMENDED...