LD05-A80
1 / 5Páginas

Excertos do catálogo

DIGITAL LASER DISTANCE METER The RIEGL LD05-A80 is a multi-purpose laser distance meter based on precise time-of-flight laser range measurement. It uses state-of-the-art digital signal processing enabling precise distance measurement for complex multi-target situations even under bad visibility conditions. Digitizing the echo signal and subsequent analyzing allows multitarget distance measurements. Up to 5 target distances can be detected and provided for each laser shot. The digitized waveform data can be logged to either an internal memory card or a TCP/IP data port. Subsequent offline full wave form analysis allows detailed investigation of the target situation, especially with complex target situation The RIEGL LD05-A80 can be configured for various application modes: • High Penetration and High Accuracy Mode for complex target situations, based on a sequence of laser shot measurements, self-adapting (rather low) data update rate, significant enhancement of the maximum range based on Pre-Detection-Averaging. • Fast Mode is between High Speed and High Penetration Mode. • High Speed Mode for simple target situations, high data update rate. • Short infrared laser pulses providing excellent interference immunity • Narrow measurement beam with low divergence for excellent spatial resolution • Measurement to almost any surface regardless of the angle of incidence of the beam and the surface characteristics • Lightweight, stable aluminium housing, ready to be used in harsh industrial environments. • Different basic instrument types with pre-configured measurement modes, but also individually programmable for customer specific applications. visit our webpage www.riegl.com

Abrir o catálogo na página 1

Real Time Range Measurement Mode: Specifications Examples for integrated predefined measurement programs: 1) The following conditions are assumed • target is larger than footprint of laser beam, • perpendicular angle of incidence, • visibility 10 km • typical values for average ambient brightness conditions. In bright sunlight, the operational range is considerably shorter than under an overcast sky. At dawn or at night the range is even higher. 2) Not specified for retroreflectors. 3) One sigma standard deviation @ 50 m range under RIEGL test conditions. 4) Plus distance depending error <...

Abrir o catálogo na página 2

Full Waveform Mode (Optional): The digitized waveform data can be logged to either an internal memory card or to a TCP/IP data port. Subsequent offline full waveform analysis allows detailed investigation of the target situation, especially with complex target situations. 1) 0.8 mrad correspond to 80 cm beam width per 1000 m distance. Data sheet, RIEGL LD05-A80, 2019-10-17 page 3 of 5

Abrir o catálogo na página 3

1) See dimensional drawings, dimensions without telescope 2) The life expectancy (MTBF) of the instrument is reduced in case of operation and/or storage at high temperatures. 3) Operating range selectable via TCP/IP port or serial interface. 4) Switching points adjustable via TCP/IP port or serial interface. Data sheet, RIEGL LD05-A80, 2019-10-17 page 4 of 5

Abrir o catálogo na página 4

Preliminary Datasheet Technical Data LD05-A80 Dimensional Drawings All dimensions in mm Copyright RIEGL Laser Measurement Systems GmbH © 2019 – All rights reserved. Use of this data sheet other than for personal purposes requires RIEGL’s written consent. This data sheet is compiled with care. However, errors cannot be fully excluded and alternations might be necessary. Data Sheet, RIEGL LD05-A80, 2019-10-17, page 5 of 5 RIEGL Laser Measurement Systems GmbH, 3580 Horn, Austria Tel.: +43-2982-4211, E-mail: office@riegl.co.at, www.riegl.com RIEGL USA Inc., E-mail: info@rieglusa.com,...

Abrir o catálogo na página 5