Solaris Series
1 / 2Páginas

SOLARIS, RECTANGULAR CONNECTORS Small, lightweight, sealed, low cost, rugged rectangular solutions. Overview Solaris is a small, plastic, easy-to-use rectangular connector designed specifically for low and medium power applications. Solaris’ spring-loaded slide lock mechanism is a snap to use - simply push to lock, and slide to unlock. The slide lock provides convenient single handed & tool-less mating, eliminating the Foreign Object Debris (FOD) found in typical screw mount D-Subs. Each housing has raised finger ridges for a sure grip, and a built-in cable tie access hole provides a “zero footprint” method to secure the connector to a bulkhead or cable bundle. High grade Polyetherimide plastic makes SOLARIS suitable for man/machine interfaces with high mating cycles, and provides a wide operating temperature range. Ultrasonically welded components means void free joints, sealing out humidity for long lasting, crack free operation over the life of the installation. Interfacial seal and wire seal grommets provide IP67 sealing, meaning your application is free from dust, moisture and corrosion when exposed to the real world. Features & Benefits Low profile rectangular form factor Less than 0.5” tall. Fits into seat arms, backs, tray tables and compartments, lower profile ceiling/side panels. Blind mate keying Interfacial and Wire sealing Environmental sealing to IP67. Wet, damp, and dusty applications Testing (See Solaris Catalog for details) Shock and Vibration Fluid Immersion / Chemical resistance Altitude Immersion Testing to 75,000 feet Flammability: UL94 Temperature range: -65˚C to 150˚C Polyetherimide Housings (Ultem) Wide operating range, chemical resistance, & high mating cycles: 500+ Reverse gender capability Plugs & Receptacles may be configured with pins or sockets, allowing live power connector to be either plug or receptacle, depending on application requirements Standard contacts AS39029 MIL Spec contacts for broad application compatibility. Stamped & Formed available as lower cost option. Industry standard tools. Slide Latch Easy-to-use, FOD free, tool-less mating Integrated Tie Wrap hole Zero footprint tie down to pipes, bundles, and bulkheads Integral boot ridge Integrated feature for tying off protective sheathing and braids w/o adding backshells or saddle clamps Multiple Configurations Inline, Square Flange Snap-on strain relief Tool-less, FOD free accessory that helps prevent wear and tear at cable / connector ingress Prevents contacts from being bent or electrically shorted during mating Visit amphenolpcd.com for more informa

SOLARIS Materials & Specifications Item Test Method Insulator Body Coupling Nut Grommet & Face Seal Contact Retainer Contacts Temperature Range Temperature Life Insulation Resistance Dielectric Withstanding 500 mating cycles minimum 1000 typical Altitude Immersion 5% salt solution, 75K feet Temperature Cycling Five 1 hour cycles” -65oC to 125oC Mil-Std-1344, Method 1003, Test Condition A EIA-364, Test Procedure 32E Mil-Dtl-38999L, Paragraph 4.5.23.2.2 EIA-364-38E, test Condition IV; Test Condition VI-J Salt Spray 5% Salt Spray @ 95oC for 48 Hours Mil-Std1344, Method 1001, test Condition B...