CPT6010 Digital Pressure Transducer
1 / 2Páginas

Testing and Calibration Technology Digital Pressure Transducer Model CPT6010 Applications ■ High accuracy transfer standard ■ Internal pressure transducer in OEM devices ■ Pressure standard in test & calibration stands ■ Wind tunnels ■ Hydrology ■ Oceanography ■ Aerospace ■ Meteorology Features ■ 0.020% FS accuracy ■ Single and dual calibration ■ Ranges: Absolute: 0 ... 7.5 psia up to 0 ... 6015 psia Gauge: 0 ... 5 psig up to 0 ... 6000 psig Bidirectional: -2.5 ... 2.5 psig up to -15 ... 6000 psig ■ Resolution to 1 ppm ■ Absolute or Gauge ■ Pneumatic or Hydraulic ■ Customer assigned pressure units ■ RS-232 or RS-485 communication ■ Multi-drop capability ■ Reading Rate 50 Hz ■ 303 stainless steel housing Description General The CPT6010 Digital Pressure Transducer is a self-contained pressure sensing device that provides high accuracy pressure measurements in both the single and dual calibration models. This transducer incorporates a low hysteresis silicon sensor with electronically compensated pressure linearity over the specified temperature range. The CPT6010 Transducer is characterized over the full pressure and temperature range to achieve 0.020% FS uncertainty. This uncertainty specification includes linearity, hysteresis, repeatability and temperature errors. Also featured is an output which is updated at a rate of 50 readings per second (20 ms). Applications The CPT6010 is used in OEM Applications where a high accuracy pressure sensing is required. It can also be used as a transfer standard or in pressure calibration and testing areas of production facilities. Functional Flexibility The CPT6010 Digital Pressure Transducer is a high accuracy pressure measurement component that uses either RS-232 or RS-485 to communicate with a host computer over long distances. Any MS-DOS compatible PC with an available serial output port can serve as the host controller. System designers will appreciate the flexibility offered by having highly accurate pressure transducers that are not tied to a front panel and which may be located remotely. For remote operation the transducer equipped with RS-485 can be located up to 4,000 feet from the host. A simple cable can accommodate both the power and the two-way communications requirements. Data Sheet CPT6010- PN 0019645001B • 03/2017 Page 1 of 2 Related Products: CPT6100 and CPT6180 Digital Pressure Transducer Pressure Systems

Total Uncertainty 0.020%FS. Total uncertainty (k=2) includes hysteresis, linearity, repeatability, reference standard, drift and temperature effects over the calibrated range for the calibration interval specified with periodic re-zeroing. 1LabVIEW® is a trademark of National Instruments Corporation. Multi-drop The maximum number of RS-485 Series 6000 Capacity transducers which can be connected to a single Case Size 1.75” wide x 6.0” long (4.45 x 15.24 cm), not including pneumatic and electrical. Weight Approximately 12 ounces (340.2 grams) Media All media compatible with...