
Excertos do catálogo

Convenience package removed; Control mounted on top for shipping Shipping Dimensions Control 86in (2184mm) Spindle Head as Shipped Shipping height (94"/2388mm) and width (8572159mm) shown Contact your local Haas Factory Outlet for further breakdown information
Abrir o catálogo na página 1
VF-1YT Note: Foundation must extend at least 12in (305mm) from bored holes 12in (305 mm)
Abrir o catálogo na página 2
Machine Layout Drawing VF-1YT Interior Travels VF-1YT Rev B Page 3 of 5 March 2016 X/Y Axis Clearances 1. The table shown is at XY home, the dashed line is the table at max XY travels 2. Measurements are from the edge of the table to the nearest obstruction 3. Dimensions shown are at the top of the table, dimensions are reduced as the height increases (5 degree slope inside the sheet-metal) 4. Dimensions are symmetrical unless otherwise stated Notes: 1. P-Cool dimension varies based on P-Cool position 2. Refer to the page on tool changer dimensions for tool changer heights
Abrir o catálogo na página 3
18in (457mm) Usable Table Size
Abrir o catálogo na página 4
Tool Changer Arm Moves Down 4.5" (114mm) During Tool Change The Umbrella Tool Changer moves in towards the spindle to do a tool change.
Abrir o catálogo na página 5Todos os catálogos e folhetos técnicos HAAS AUTOMATION
-
ROTARIES & INDEXERS
4 Páginas
-
Vertical Mills Universal Series
2 Páginas
-
SuperSpeed-VF
4 Páginas
-
Lathes Dual-Spindle Series
2 Páginas
-
WIPS
62 Páginas
-
Lathe Operator’s Manual
456 Páginas
-
Haas Bar Feeder
62 Páginas
-
Compact Mill
34 Páginas
-
Chucker Lathe
62 Páginas
-
HA5C
1 Páginas
-
HA2TS Machine
1 Páginas
-
VF-7/40
1 Páginas
-
DM-2
4 Páginas
-
DM-1
3 Páginas
-
VF-1
5 Páginas