Catálogos >
EATON CROUSE-HINDS >
Clamped EBMXD Series Explosionproof Disconnect Switches

Clamped EBMXD Series Explosionproof Disconnect Switches
1 / 3Páginas

Excertos do catálogo

Clamped EBMXD Series Explosionproof Disconnect Switches - 1

Applications: • Operating where flammable liquids or gases are handled, processed or used • Damp, wet, dirty, dusty, hazardous areas where ultimate corrosion and ingress protection is required • Harsh and hazardous motor control environments, including refineries, chemical and petrochemical plants, corrosive process facilities, food and beverage, marine and mining • Motor disconnect with circuit protection for motor circuits, lighting, heating and appliance Features: • Clamped enclosure significantly reduces time to enter enclosure and reduces opportunity for missing, stripped or broken bolts • 65kAIC at 480V enclosure rating for high interrupting capacity applications • -50°C to +60°C temperature range for extreme environments • Fusible and non-fused designs for a variety of circuit protection • Side operated handle provides visual confirmation of proper operator alignment while cover is open and can be padlocked in either "ON" or "OFF" positions for OSHA compliance • Neoprene cover gasket provides NEMA 4X protection for hose down applications • Maximum wiring room compliance with National Electrical Code® requirements allows for easy and safe installation • Rugged, corrosion-resistant, cast copper-free aluminum construction provides NEMA 4X protection • Semi-clamshell enclosure design, with an external flanged ground joint between body and cover, provides increased access to interior components • Minimum enclosure-to-enclosure spacing with little interference between the opened cover and adjacent enclosure • Detachable tap-on mounting feet • Steel brackets supplied standard for lifting during installation • Bodies have top and bottom drilled and tapped entries for power and control conduits; removable reducers are supplied standard to accommodate smaller size conduits; all conduit entries are plugged Certifications and Compliances: NEC/CEC: • Class I, Divisions 1 & 2, Groups BO, C, D • Class I, Zones 1 & 2 • Class II, Groups E, F, G • Class III UL Standards: • UL1203 - Explosionproof and Dust-ignitionproof Electrical Equipment for use in Hazardous (Classified) Locations • UL2062 - High AIC Ratings for Groups C, D Voltage (AC) RMS Symmetrical Amps Standard Materials: • Body and cover - copper-free aluminum • Clamp - anodized copper-free aluminum • External hardware - stainless steel • Internal parts - galvanized steel OHigh AIC and -50°C temperature certifications do not apply for Group B. www.crouse-hinds.com US: 1-866-764-5454 CAN: 1-800-265-0502 Copyright© 2016 Eaton CSA Standard: • cUL to CSA C22.2 No. 30 Additional Certifications: • UL/cUL certified for -50°C to +60°C SASO Certificate of Conformity Environmental Ratings:

Abrir o catálogo na página 1

Clamped EBMXD Series Explosionproof Disconnect Switches - 2

Clamped EBMXD Series Explosionproof Disconnect Switches Cl. I, Div. 1 & 2, Groups B©, C, D Explosionproof Cl. I, Zones 1 & 2 Dust-ignitionproof Ordering Information: Part number example EBMX I Series Hazardous Rated EBMX Enclosure with Clamping Technology Disconnect in Clamped EBMX Enclosure ^ Enclosure Size 1 All Non-fused; 30A, 60A Fused AIC 65kAIC at 480V, 35kAIC at 600V Enclosure Rating HT +60°C Enclosure Rating R11 Space Heater, 25 Watts, 120V R22 Space Heater, 25 Watts, 240V R44 Space Heater, 25 Watts, 480V RLN 120V Red LED Light with "ON" Legend Plate RLN2...

Abrir o catálogo na página 2

Clamped EBMXD Series Explosionproof Disconnect Switches - 3

Cl. I, Div. 1 & 2, Groups B©, C, D Explosionproof Cl. I, Zones 1 & 2 Dust-ignitionproof Dimensions (in Inches): Drilled & with Tapped Reducer J K Enclosure Size ABODE ©High AIC and -50°C temperature certifications do not apply for Group B. www.crouse-hinds.com US: 1-866-764-5454 CAN: 1-800-265-0502 Copyright© 2016 Eaton

Abrir o catálogo na página 3