Catálogos >
AveoEngineering s.r.o. >
StrobeTailNano

StrobeTailNano
1 / 6Páginas

Excertos do catálogo

1. STROBETAIL NANO If your aircraft has an extremely thin and streamlined empennage, the PosiTail Nano™ and StrobeTail Nano™ are the ultimate solution! As the world's smallest position and strobe light assemblies that meet all DO-160F and FAR requirements, these two lights will make your aircraft legal for night flying if your wing lights are not parallel to your aircraft centerline due to wingtip shapes. These lights also are part of Aveo's exclusive GreenAir™ earth friendly aviation lighting series. 2. TECHNICAL SPECIFICATION Dimensions (light): Weight: Nominal Operating Voltage: see...

Abrir o catálogo na página 3

6. TESTING THE FUNCTION OF THE AVEO AURORA SERIES LIGHTS BEFORE INSTALLATION All Aveo Aviation lights undergo rigorous testing prior to being released from our engineering manufacturing department. This testing involves a burn-in time as well as other function testing. No light is released for sale without undergoing this extensive operational testing. When you receive the Aveo Aurora Series Aviation Lights, and wish to test the function of the lights prior to installation on your aircraft, please note the following: 1. Please review the written information that is enclosed in the...

Abrir o catálogo na página 5

2. Remove the lights from the package. Note that there are three (3) wires coming from each light. These wires are: a. Black wire – Ground wire (negative lead) b. Yellow wire – Strobe light function wire (positive lead) c. Blue wire – used if the synchronization of the Aveo lights is selected 3. Testing of the function of the light can be done with a regular 12V/5A dc power supply (not a battery chargers). Connect the black wire to the ground (negative) leads of a power supply, then connect the yellow wire to the positive (+) leads on the power supply. The anticollision light should start...

Abrir o catálogo na página 6