ZA293
1 / 3Páginas

Tungsten halogen technology ZA293 Runway Edge Low intensity omni-directional inset fitting Compliance with standards • Body casting manufactured from aluminium alloy for lightness, strength and durability • FAA AC 150/5345-46C L-852E, L-852F, F-852T • ICAO Annex 14 circular guidance 5.3.6, 5.3.9.8, 5.3.9.9 • CAA CAP168 Table 6A/1 Low intensity, taxiway edge and circular guidance • BS3224 Part 5, inset fittings • IEC 61827 • STANAG 3316 Annex C fig 3 • IEC body style as standard, 8” 2 hole and 8” 3 hole versions available • Long life lamps (objective life of 1500 hours at full brilliancy) • Prism removal and replacement achieved without the need for adhesive or sealants • 3 hole body option for direct installation to SRA8/13 adaptor ring • Colour beam variations achieved by dichroic coated or coloured glass • Lamp by-pass options available if required • Suitable for direct installation in a ZM109, ZM181 or ZM203 IEC seating pot with only two point fixing Omni-directional inset fitting for Taxiway, Helipad, LI Runway Edge and general applications. • Low profile (10mm) • Commonality of parts with the ZA181 and ZA280 inset fittings • Light channel within 5mm of Grade • Natural anodised finish (as standard), powder coated NATO green or golden yellow • IMM available on request Electrical supply Suitable for use in 6.6A airfield lighting circuits normally supplied from 1 x 45W, 65W or 100W isolating transformer. 120V and 240V mains supply versions also available. Power consumption is either 30W, 36W, 40W, 49W or 105W depending upon type of lamp fitted.

Packaging data . ZM181 8" seating pot (dry) Gross weight 3.5kg • ZM203 (I) seating pot (dry) Carton size 230mm(w) x 230mm(d) x 146mm(h) • 500mm flying lead with 3-pin receptacle (120V and 1 Body casting (standard) 2 Prism clamp (standard) 3 Prism clamp gasket 10 Lamp retaining spring 11 Bottom cover casting (standard) or bottom cover spinning (SRA) 12 Bottom cover gasket 13 'B'type plug lead 14 Cable gland assembly @ www.atgairports.com SproductsPatgairports.com O sales-usa(a)atgairports.co

Typical installation methods Secondary lead Dry seating pot arrangement also available 4. Outer earth terminal (optional) 5. Inner earth terminal (optional) Photometric performance ' Blue performance ' (CAP 168] Minimum average ipecification (FAA] Minimum Average ipecification , (STANNAG) Minimum tverage specification Intensity (Candelas] Lowton Business Park | Newton Road Lowton St. Mary's Warrington Fort Myers | Florida 33967 @ www.atgairports.com O products(a)atgairports.com O sales-usa(a)atgairports.com