PF-AB-010
1 / 4Páginas

ATL PRODUCT GUIDE MOTORSPORT MARINE AEROSPACE DEFENCE & SECURITY SUBSEA INDUSTRIAL INFLATABLES AUTOMOTIVE Aero Tec Laboratories Ltd is the world’s leading manufacturer of Safety Fuel Cells for use in Motorsport. ATL supply vehicle manufacturers and club racers alike, and have supplied every F1 team for over 30 years. Fuel Cells range from custom built examples to a large selection of standard Saver Cells, and include refuelling equipment as well as fuel system spares and accessories. Saver Cells Manufactured from unique ATL-565 material, supplied fully foam baffled with 1 x 6 x 10” top plate, 2 x -6 fuel pick-ups, 1 x -6 roll-over vent valve, Ø 2.25” filler neck with anodised ¼ turn filler cap with non-return valve, mounted on a 76.2mm PCD with 6 bolts and a pre-marked level sender pattern. Note: SA-AA-030 is fitted with 4 x 6” top plate, 1 x -6 fuel pick up and filter, 1 x -6 roll-over vent and 1 x Ø 2.25” filler neck with safety valve and cap. FIA FT3-1999 approved. Capacity Container Dimensions Saver Cell Part No* Alloy Container Part No. 2 20L 350 x 350 x 240mm SA-AA-031 SA-AA-030 30L 534 x 326 x 240mm SA-AA-041 SA-AA-040 40L 638 x 337 x 270mm SA-AA-051 SA-AA-050 45L 531 x 464 x 250mm SA-AA-061 SA-AA-060 60L 633 x 461 x 250mm SA-AA-071 SA-AA-070 80L 673 x 673 x 225mm SA-AA-081 SA-AA-080 80L 658 x 440 x 355mm SA-AA-091 SA-AA-090 80L 881 x 459 x 250mm SA-AA-101 SA-AA-100 100L 777 x 461 x 375mm SA-AA-111 SA-AA-110 100L 661 x 443 x 445mm SA-AA-121 SA-AA-120 120L 671 x 671 x 340mm SA-AA-131 SA-AA-130 120L 671 x 496 x 445mm SA-AA-141 SA-AA-140 120L 888 x 462 x 377mm SA-AA-151 SA-AA-150 120L 646 x 441 x 560mm SA-AA-161 SA-AA-160 170L 671 x 671 x 445mm SA-AA-171 SA-AA-170 *Saver Cells are available with no top-plate or with blue foam for use with Diesel. To order use the following: Without top plate, add 4 to the part no. (e.g. SA-AA-044) With Blue Foam, add 5 to the part no. (e.g. SA-AA-045) With Blue Foam without top plate, add a 6 to the part no. (e.g. SA-AA-046) All fuel cells experience some swelling when subjected to fuels (approx. 2-4% linear), therefore allow 4 weeks of fluid contact for Racells and Saver Cells bladder dimensions to stabilise. To comply with FIA regulations, Racells and Saver Cells must be installed within an aluminium container. Internal Collector Systems Description Part No. Internal Collector System 3 Litre – no pump mounts (CL-AA-023) Internal Collector System 3 Litre with 1 pump mount to suit 36mm diameter pumps. Can also accept PRV housing.* (CL-AA-024) Internal Collector System 3 Litre – with 1 pump mount to suit Bosch pump.* (CL-AA-026) 5 Internal Collector Litre with 2 pump mounts to suit 36mm diameter pumps. Can also accept PRV housing.* (CL-AA-027) Return-less system fitted with a 1 x 5 Bar (210l/hr) Pump (PU-AB-050), Filter (FT-AC-003) and PRV housing. (PRV not included) (CL-AA-029) *Pumps not included 3 4 Dimensions Part No. Capacity 30 Litre Ø553 x 163mm SA-AA-180 30 Litre with Collector & Rear Outlet Ø553 x 163mm SA-AA-182 45 Litre Ø553 x 227mm SA-AA-190 8 45 Litre with Collector & Rear Outlet Ø553 x 227mm SA-AA-192 7 60 Litre (See ATL website for fitment info) 566 x 566 x 244mm SA-AA-220 D Cells also available in ATL lightweight rubberised fabric for weight savings. Racells Capacity 10 Litre 10 Litre with Blue Foam for Diesel/Methanol 9 20 Litre 20 Litre with Blue Foam for Diesel/Methanol Porsche 911 Saver Cell 6 Description Porsche 911 (Pre-’89) 100 Litre Saver Cell Porsche 911 (Pre-’89) 100 Litre Saver Cell without Top Plate Aluminium Container to suit SA-AA-200/204 Custom Saver Cells 10 ATL can design and manufacture Custom Shaped Saver Cells, exceeding FIA FT3 1999 specification. These uniquely tough and lightweight Fuel Cells are constructed from the renowned ATL-565 material. Custom Saver cells can already be found in the McLaren, Aston Martin and Mercedes GT4 cars, along with the M-Sport Fiesta R2 and more on the way! The ATL Saver Cell is the only genuine low cost option for an FIA FT3 Fuel Cell, and ATL’s manufacturing capabilities and cost control mean that this safe FIA approved solution is available from relatively low volumes of production. There are very few limitations for size and shape, and the ATL’s range of high technology solutions can be applied just as they are with a flexible bladder. Custom Saver Cells have a short lead time meaning great flexibility, particularly for low volume vehicle manufacturers looking for a cost effective solution with market leading capabilities. Enquire with the ATL Sales Team for further information. FOR MORE INFORMATION ON OUR PRODUCT RANGE ATLTechnology Centre, Denbigh Road,Bletchley, Milton Keynes,England, MK11DFI T: +44 (0) 1908351700 I E:sales@atlltd.comI www.atlltd.com Aero TecLaboratoriesLtd @ATLFuelCells @ATLFuelCells Aero TecLaborator

MOTORSPORT MARINE AEROSPACE DEFENCE & SECURITY SUBSEA INDUSTRIAL INFLATABLES AUTOMOTIVE Description Part No. 6 x 10” Plate Featuring; (2) -6 Holes, (1) -8 Hole, (1) 3-Pin Inserted Pattern, (1) VDO Inserted Pattern & (1) 76.2mm PCD with 6 Bolt Inserted Pattern. Inc Gaskets, Bolts & Washers (PL-BG-021) 6 x 10” Plate Featuring; (2) -6 Holes, (1) -8 Hole, (1) 3-Pin Inserted Pattern & (2) 76.2mm PCD with 6 Bolt Inserted Pattern. Inc Gaskets, Bolts & Washers (PL-BG-022) 6 x 10” Standard Saver Cell Plate (See Page 1) (PL-BG-311) 3-Pin Plate, Blank (PL-CB-002) 3-Pin Plate, -6 Hole (PL-CB-003) 3-Pin...

MOTORSPORT MARINE AEROSPACE DEFENCE & SECURITY SUBSEA INDUSTRIAL INFLATABLES AUTOMOTIVE Refuelling Bottles Single Valve 1.5” Probe Straight Neck 1.5” Probe 135° Neck 2” Probe Straight Neck 2” Probe 135° Neck Dual Valve 1.5” Dual Probe Straight Neck 2” Dual Probe Straight Neck 71 2” Dual Probe 135° Neck Single 2” Probe with Remote - 12 Staubli Vent Straight Neck 135° Neck Single 2” Probe with Remote 2” Vent Straight Neck 72 135° Neck Accessories 73 ATL Refuelling Bottle Trolley Description 200 Litre Refuelling Drum Assy to suit FIA Drawing 252-7 Without Hoses 200 Litre Refuelling Drum Assy...