Z330E
3Pages

{{requestButtons}}

Catalog excerpts

Z330E - 1

Materials testing Product Information Materials testing machine Z330E with testControl II Z400E with hydraulic grips Drawing: Z400E with hydraulic grips Innovative electronics • The new testControl II measurement and control elec‐ tronics provide the ideal basis for precise, reprodu‐ cible test results. • Developed in-house by Zwick, the electronics impress through maximum accuracy, high measured-value rates and flexible modularity. Modern load-frame design • The robust load-frame features four hard-chromed guide-columns and massive base and moving cross‐ heads, ensuring excellent guidance properties and a high level of machine stiffness. • Maintenance-free digitally controlled AC drive tech‐ nology combined with an innovative motor feedback system allows excellent constant speed characteris‐ tics to be achieved even at extremely low speeds. • The backlash-free pre-stressed precision ball-screws with digitally controlled AC servo drive allow virtually maintenance-free operation. • The large test area combined with low overall height enables specimens and components with a wide range of lengths to be tested. • The testing machine is positioned directly on the ground with no foundation. Operator convenience • Convenient operating height for specimen insertion with grips installed. • testXpert II's intelligent test environment concept reduces set-up times and increases productivity. Satisfying the most demanding safety require‐ ments • Compliance with the statutory safety requirements of the EC Machinery Directive is ensured in all materials testing machines, while an EC Declaration of Conformity accompanies every machine supplied. • Only the latest safety technology and proven industrial components are used. • The highest degree of safety for the operator, test results, specimen material, and testing system are guaranteed. Future-proof • Modular design means that the testing system can be re-equipped or upgraded whenever required. • Moreover, testControl II control electronics are compatible with future-generation Zwick software. • Even after a product has been discontinued, spare parts rema

Open the catalog to page 1
Z330E - 2

Zwick Materials testing Zw/ck / RoellProduct Information Materials testing machine Z330E with testControl II Description Load frame Paint finish Ambient temperature Humidity (non-condensing) Drive Motor motor holding brake Control, set-value specification Controller/cycle time Repeat positioning accuracy on crosshead Measurement and control electronics Number of slots available for measurement and control module Force measurement Calculated resolution (e.g. load cell in tensile/compression direction) Measured-value sampling-rate, internal Measured-value transmission rate to PC Zero-point...

Open the catalog to page 2
Z330E - 3

Zwick Materials testing Product Information Materials testing machine Z330E with testControl II Product data Type Standard H1 - 500Item Number 1012978 1013494 Load frame Test force Fn in tens./comp. direction 330 330 Stiffness of load frame at H2 = 1000 mm 511 511 Test stroke - H3 (with hydraulic grips) 1400 900 Weight without attachments 1850 1700 with hydraulic grips 2250 2100 Specific floor loading (with hydraulic 2.7 2.5 grips) Noise level at maximum test speed <75 <75 Increased crosshead return speed (at 520 520 reduced force)...

Open the catalog to page 3

All ZWICK GMBH & CO. KG catalogs and technical brochures

  1. HC Series

    2 Pages

  2. HB series

    3 Pages

  3. LTM

    5 Pages

  4. roboTest A

    2 Pages

  5. roboTest B

    2 Pages

  6. roboTest I

    2 Pages

  7. roboTest P

    2 Pages

  8. H-series

    2 Pages

  9. Vicat Dry

    2 Pages