Product Information ZwickRoell Vibrophore 25 Range of applications The ZwickRoell Vibrophore represents the latest genera‐ tion of high-frequency pulsators, combining for the first time an electro-magnetically excited dynamic testing machine with a fully functional static materials testing machine. This is made possible by the 'two in one' function developed by ZwickRoell. Advantages and features • fully functional static and dynamic testing machine with stiff four-column load frame • high test-frequencies, giving short test times and high specimen throughput • easy to operate via testXpert III and testXpert Research test programs matched exactly to the testing situations • resonance drive has very low energy consumption (only around 2% of that of servo-hydraulic testing machines) • easy to install - no ancillary units or systems (e.g. hydraulics, coolant) needed • maintenance-free system - wear-free components • clamping table at convenient working height for oper‐ ator-friendly testing • remote control with color display showing measure‐ ment channels, machine and test status; also used for machine set-up • testControl II digital measurement and control elec‐ tronics with 10kHz control frequency and 24-bit reso‐ lution • continuously controlled servo motor for fast, accurate mean force control • pulse-width modulation for high control stability and low failure liability • easy test-frequency change simply by varying weights. • large range of standard tools and fixtures As well as being employed for quasi-static tensile and compression tests, Vibrophores are used in particular for determination of fatigue strength with regard to fatigue life and fatigue limit. This allows highly efficient fatigue testing, for example to DIN 50100 (S-N curve), with tensile, compression, pulsating and alternating loads. Other typical applications include fatigue tests on components (e.g. connecting rods, crankshafts, chains and threaded connectors) and standard metal speci‐ mens, together with fracture mechanics investigations on CT and SEB specimens, All tests can be force, displacement or strain-controlled, while with the addition of appropriate devices testing can also be carried out under various environmental conditions (e.g. temperature, aggressive media), toget

Description Value Fmax 25 kN Specimen elastic strain (oscillation displacement) max. 6 (±3) mm Frame stiffness at 1000mm crosshead separation3) Approx. 170 kN/mm Drive Static tests and for mean force control AC drive Maximum crosshead return speed 1000 mm/min Repeat positioning accuracy on crosshead ±2 pm Motor holding break Yes Dynamic tests Wear-free electro-magnetic drive H2 - height of test area 1200 mm H5 - height test area including force measurement chain 1100 mm Test area dimensions Test-area height without load cell 1200 mm...

testControl II measurement and control electronics Control frequency Measured-value acquisition Slots PC interface Integrated safety concept Display-equipped remote control unit Dimensions, testControl II measurement and control H1-height without table plate B1-width Approx. weight Length of cable Vibrophore - testControl II Accessories Universal measurement amplifier (029443) 10 kHz 10 kHz, 24 bits, arithmetical 5 x module bus (2 occupied as default) GigaBit Ethernet 2-channel specification for maximum safety interface for interlocked safety doors interface for Emergency STOP loop set-up or...