Materials testing Product Information Horizontally oriented cruciform testing machine with electromechanical testing actuators for tests up to 2 kN Cruciform testing machine with round table Cruciform testing machine with crosswise support frame Range of application This cruciform testing machine is designed for uniaxial or biaxial tests on films/foils, paper, elastomers and biological materials up to a maximum test force of 2kN. only two measurement and control electronics units are required. A circular baseplate constructed from aluminium profiles is mounted on a support frame. Arranged crosswise on the baseplate are four electro-mechanical testing actuators, each with a standard stroke of 200mm If longer actuator strokes are required, a baseplate formed of crosswise aluminium profiles is available. The testing actuators plus additional piston-rod guide-assemblies are located on the profiles. For strain measurement and control the videoXtens extensometer is available; specimen strain is recorded in the x/y directions. Mid-point control is available as an option if required in addition to strain measurement and control. The videoXtens is mounted on a sturdy holding fixture and records the resulting strain in both test axes from above. The analog measurement signals are recorded in the assigned measurement and control electronics and used to control the electro-mechanical testing actuator. If mid-point control is not required, the drive axes can also be provided in master-slave mode, in which case Tests in liquid media can be performed using a heightadjustable bath with external temperature-control unit. Advantages and features • employs proven Zwick standard components • convenient working height • unobstructed view of specimen • videoXtens employed for strain measurement and control • testControl measurement and control electronics • force or displacement control with smooth switching between modes • testXpert II Master test program with graphical multiaxial sequence editor for 4 test axes for generation of customer's own test sequences • low maintenance costs combined with high life-expectancy • safety housing in compliance with CE Machinery Directive depending on application • large range of specimen g

Zwick Materials testing Zw/ck / RoellProduct Information Horizontally oriented cruciform testing machine with electromechanical testing actuators for tests up to 2 kN Installation drawing showing arrangement with round table Fmax 2 2 kN Load frame dimensions height (max.) 20001 21001 mm 1) incl. videoXtens mounting Accessories required Description Item number Mobile Emergency STOP 362806 Operating panel for activating testControl electronics 043332 Voltage distributor with main switch 073113 Description Item number Safety enclosure, two-sided, with access door...