Product Information Robotic Testing System ‘roboTest B’ (Compact) Robotic testing system ‘roboTest B’ with testing machine 20 kN Pincer gripper removes a specimen from the magazine Advantages of the Robotic Testing System ‘roboTest B’ The robotic testing system is used for the fully automatic performance of: • Tensile tests on plastics specimens (e.g. according to ISO 527-2, ISO 3167, ASTM D638) • Flexure tests on plastics specimens (e.g. according to ISO 178) • Tensile or flexure tests on dimensionally stable specimens of other materials System Configuration • A high reproducibility of the test results is obtained because operator influences are excluded (hand temperature, moist hands, eccentric or inclined insertion of specimens etc.). • Qualified laboratory staff is relieved of routine jobs and is thus available for more complex activities. • The machine can be used during idle times (break, night shift) thus increasing the rate of utilization and allowing „quicker“ results. • The system reduces the testing costs per specimen and usually pays off within one to two years. • Materials testing machine 5 kN up to 100 kN with symmetrically closing, pneumatic or hydraulic specimen grips and an optional extensometer • Manual tests are still possible by simply pushing the • Robotic feeding system ‘roboTest B’ with integrated • The automatic data logging system ensures secure magazine for max. stacking height 80 mm (for typically 20 specimens) • Industry Controller with test software testXpert® and PI663 2.1108 robotic feeding system aside. documentation and enables statistical long-term

Zwick Materials Testing Zw/ck / RoellProduct Information Robotic Testing System ‘roboTest B’ (Compact) Technical Data Mechanics Mounting swivellable at the load frame Capacity 20 specimens (thickness 4 mm) (without specimen) 11 Load frame in profile design 2) Load frame in column design Connected values Electrical connection Output Mains frequency Compressed air Required compressed air Test Sequence • The user fills the specimen magazine directly on the test system. • The specimen data (ident number, width, thickness,...) are entered on the PC. In barcode operation this step can be omitted. •...