Materials testing Product Information RetroLine testControl II zwickiLine zwicki 1120 with MOPS before modernization zwicki 1120 after modernization with testControl II Advantages and features As well as providing modernization packages for large testing machines, Zwick also carries out modernizations on machines with low nominal loads. zwickiLine modernizations are performed exclusively at Zwick's premises in Ulm. MOPS electronics: Continued service reliability and future upgradeability no longer guaranteed Future upgradeability for machines with this generation of electronics can no longer be guaranteed. New devel‐ opments, for example in testxpert III testing software or modern sensor technology, cannot generally be used in conjunction with MOPS measurement and control elec‐ tronics. MOPS electronics can no longer satisfy the requirements of a number of new standards, particularly where high data acquisition rates and fast response times are required. As of 8 April 2014 Microsoft has ended support for Windows XP; this represents a rela‐ tively high potential security risk. For the use of Windows 7 in conjunction with MOPS electronics, Zwick is only able to supply a testXpert II version "frozen" in 2011 and excluded from future develop‐ ments. Zwick guarantees spare-part availability and technical service and support for ten years following discontinuation of a generation of electronics. This tenyear period ended on 31 December 2016. Zwick will endeavor to provide assistance after this date wherever possible, but obtaining spare parts and providing tech‐ nical support is becoming increasingly difficult. • over 20 years' experience in modernizing materials testing machines • warranty for newly installed components, as with new machines • renewed long-term service and support • rapid assistance via Hotline and in the event of repairs • testControl II measurement and control electronics satisfy the most demanding safety requirements • enables validation of the testing machine in accord‐ ance with the latest quality standards • intelligent testXpert III testing software • re-use of expensive components such as extensome‐ ters and specimen grips • existing load cells converted and re-calibrated • new

Zwick Materials testing Zw/ck / RoellProduct Information RetroLine testControl II zwickiLine Description Value Machine electronics Number of available slots for measurement and control modules: Synchronized module slots 2 (expandable to 5)1 Synchronized PCIe slots 1 Force measurement Class 0.5/1, depending on load cell, compliant to Measurement range Calculated resolution (e.g., load cell in tensile/compression direction) Effective resolution in tensile/compression direction: DCSC module USC module Measured value recording rate Measurement value transmission rate to PC Zero-point...