Materials testing Product Information RetroLine testControl II AllroundLine New from old - modernization in Zwick's workshops with load-frame overhaul, including repainting Modernization Even though older testing machines may have given faithful service over many decades thanks to their robust construction, the demands and requirements of today's technology can no longer be met using outdated equipment. Precision and reproducibility are key criteria in materials testing today, as is the observ‐ ance of current safety regulations. The needs of the markets can best be served with innovative products and sophisticated technology. The modular design of Zwick testing machines means that retrofit sets are available for all types, regardless of nominal force rating. Just as with our own machine ranges, modernizing machines from other manufac‐ turers presents no difficulty for Zwick. We have already converted 40 different makes of machine to Zwick tech‐ nology, acquiring a great deal of knowledge in the process. Advantages and features • Over 20 years' experience in modernizing materials testing machines • Warranty for newly installed components, as with new machines • Renewed long-term service and support • Rapid assistance via Hotline and in the event of repairs • testControl II measurement and control electronics satisfy the most demanding safety requirements • Enables validation of the testing machine in accord‐ ance with the latest quality standards • Use of intelligent testXpert III testing software • Re-use of expensive components such as extensom‐ eters and specimen grips • Existing load cells converted and re-calibrated • modern drive technology, achieved by installing a new, energy-efficient AC motor, with greatly improved contr

Zwick Materials testing Zw/ck / RoellProduct Information RetroLine testControl II AllroundLine Zwick Z100 modernized with testControl II Zwick 1474 (100 kN) modernized with testControl II testControl II - innovative machine electronics The new testControl II measurement and control electronics provide the ideal basis for precise, reproducible test results. As well as setting new standards in accuracy, control and acquisition rate, testControl II is laying down a benchmark for drive speed. The machines feature high positioning and return speeds, while the additional fast return ensures short...

Zwick Materials testing Zw/ck / RoellProduct Information RetroLine testControl II AllroundLine Description Calculated resolution (e.g., load cell in tensile/compression direction) Effective resolution in tensile/compression direction: DCSC module USC module Measured value recording rate Measurement value transmission rate to PC Zero-point correction Measurement signal, runtime correction Interface to PC Eco mode CE conformity 19 bits (corresponds to ±512,000 points) 20 bits (corresponds to ±1,000,000 points) 400 kHz Automatic, at start of measurement Yes Ethernet Yes, automatic switch off...

Zwick Materials testing Product Information RetroLine testControl II AllroundLine Description Nominal load 100 to 250 kN 1475 with V= 500 mm/min and test-area height 1892 mm 1476 with V= 1000 mm/min and test-area height 1892 mm Z100/TL with V= 200 mm/min and test-area height 1360 mm 1474 with V= 600 mm/min and test-area height 1200 mm Z100/SN with V= 200 mm/min and test-area height 1757 mm Z100/SN with V= 1000 mm/min and test-area height 1757 mm 1474 with V= 600 mm/min and test-area height 1600 mm (raised 400 mm) 1478 with V= 500 mm/min and test-area height 1066 mm Z100/TL with V= 1500 mm/min...