Product Information Materials testing machine with hydraulic drive Z400H / Z600H Figure: Zwick Z600H with hydraulic grips Figure: Drawing of Zwick Z600H with hydraulic grips Further advantages and features • These hydraulic materials testing machines have a • Extremely stiff, robust load frame. single, central hydraulic drive. • Optionally available with an adjustable top crosshead, allowing the test area to be adjusted to customers’ requirements. • High-resolution, channel-synchronized measurement technology provides extremely precise, accurate determination of material characteristic values. No range-switching is necessary as load signal resolution is available over the whole range. • Wide measuring range allows even small test loads to be determined accurately without re-tooling. • Standard tests using Zwick testXpert® software require only single-button operation. • Modular design throughout the system allows the entire Zwick accessory range to be used, including a wide variety of extensometers, specimen grips and other test tools. • Should new test requirements arise, additional test tools (e.g. calibration blocks) can very easily be installed by means of a T-slot or screw system. • Can be tailored to customers’ specific requirements (e.g. test devices, specimen grips, test speed ranges, testing software).

Zwick Materials Testing Zw/ck / RoellProduct Information Materials testing machine with hydraulic drive Z400H / Z600H Z600H 600 fixed 2 600 2913 1030 500 1578 670 500 250 1870 2470 1.5 0.16 ± 0.01 * 358422 Number of lead columns 2 2 Stiffness of the load frame at Fmax (without specimen grips and load cell) approx. [kN/mm] 400 400 Dimensions of load frame H1 - Height [mm] 2913 max. 3213 Dimensions of test area H2 - Height [mm] 1578 max. 1878 Test speed max. [mm/min] 340 340 Weight without tools / specimen grips (with electronics) [kg] 1800 1950 with specimen grips...