*myaeroexpo

G3 Technical Data

Product catalog summary

Specifications
The document outlines the technical specifications for a series of cutting machines. Key specifications include:

Repeatability: ± 0.03 mm / ± 0.001”
Position accuracy: ± 0.1 mm/m / ± 0.0012”/ft + repeatability
Floor load requirements: 200 kg/m² / 45 lbs/ft²
Interface: RS232C/V24, Ethernet 10/100Mbit
Operating temperature: 10-35 °C / 50-95 °F
Relative humidity: 10-80% non-condensing
Noise emission: < 75 dB(A)
Beam height: 30/60/120 mm / 1.1/2.3/4.7”
Electrical requirements: AC 3ph+N+GND, 208/400 V, 50/60 Hz, 32 A
Max. material weight: 30 kg/m² / 6 lbs/ft² (manual loading)

Speed and Acceleration
The machines have the following speed and acceleration capabilities:

Max. speed X/Y-axis: 1414 mm/s / 55”/s
Max. acceleration X/Y-axis: 9.3 m/s² / 366”/s²
Max. speed Z-axis: 500 mm/s / 20”/s
Max. acceleration Z-axis: 10 m/s² / 393”/s²
Max. rotation speed T-axis: 44.2 rad/s
Max. rotation acceleration T-axis: 3068 rad/s²

Base Machine Specifications
The document provides detailed dimensions and weights for various machine models, including:

M-1600: Working area 1330 mm × 1600 mm, weight 670 kg
M-2500: Working area 1330 mm × 2500 mm, weight 840 kg
L-2500: Working area 1800 mm × 2500 mm, weight 970 kg
L-3200: Working area 1800 mm × 3200 mm, weight 1110 kg
XL-1600: Working area 2270 mm × 1600 mm, weight 890 kg
XL-3200: Working area 2270 mm × 3200 mm, weight 1280 kg
2XL-1600: Working area 2740 mm × 1600 mm, weight 980 kg
2XL-3200: Working area 2740 mm × 3200 mm, weight 1420 kg
3XL-1600: Working area 3210 mm × 1600 mm, weight 1120 kg
3XL-2500: Working area 3210 mm × 2500 mm, weight 1430 kg
3XL-3200: Working area 3210 mm × 3200 mm, weight 1610 kg

Material Width
The maximum material width varies by series and whether the cutter has a static work surface or material transport:

M-series: 1610 mm / 63” (static), 1330 mm / 52” (transport)
L-series: 2080 mm / 81” (static), 1800 mm / 70” (transport)
XL-series: 2550 mm / 100” (static), 2270 mm / 89” (transport)
2XL-series: 3020 mm / 118” (static), 2740 mm / 107” (transport)
3XL-series: 3490 mm / 137” (static), 3210 mm / 126” (transport)

Additional Notes
The document notes that technical data is subject to change without notice and provides contact information for Zünd Systemtechnik AG.

Catalog excerpts

Base machine Specifications, speed, acceleration Speed, acceleration repeatability 1) position accuracy 1) floor load requirements interface operating temperature max. rotation speed T-axis relative humidity beam height electrical requirements max. material weight max. rotation acceleration T-axis 30/60/120 mm / 1.1/2.3/4.7“ AC 3ph+N+GND, 208/400 V, 50/60 Hz, 32 A 30 kg/m² / 6 lbs/ft² (manual loading) (can affect the evenness of the working surface) X/Y drive system, static, at constant operating temperature (may vary depending on cutting tool/method). Noise levels may vary between <75 dB(A) and ~85 dB(A) depending on ambient conditions and type of cutting technology, materials, and vacuum generator being used. 120 mm / 4,7” beam height available only for cutter sizes L-3200, XL-3200. Depending on cutter size, modules.

Open the catalog to page 1

Technical Data G3 Base machine Dimensions, weight, material Overall dimensions, incl. workstation (B x A) Machine weight max. materialwidth cutter with static work surface max. materialwidth cutter with material transport

Open the catalog to page 2

Technical Data G3 Cutter with light curtain and static work surface Dimensions, material Overall dimensions, incl. workstation (B x A)

Open the catalog to page 3

Technical Data G3 Cutter with light curtain and material transport Dimensions, material Overall dimensions incl. workstation (A + 2X) × C Zünd Systemtechnik AG Industriestrasse 8 ∙ CH-9450 Altstätten ∙ T +41 71 554 81 00 ∙ in

Open the catalog to page 4

All ZUND SYSTEMTECHNIK AG catalogs and technical brochures

RM-L
3 Pages
OCC
3 Pages
ICC
1 Page
Technical OverviewG3 Digital Cutter
5 Pages