ACCURA
8Pages

ZEISS ACCURA® Specifications Version: 2020-11 Seeing beyond

System description Applies to ZEISS ACCURA with an active probe and navigator function. Acceptance test with stylus length of 60 mm and tip diameter of 8 mm. Also valid for other styli (0 3 x 33 mm, 0 5 x 50 mm, 0 8 x 114 mm and 0 12 x 92 mm were tested). Measuring location near the calibration position to document sensor properties. Roundness in scanning mode for Vscan = 5 mm/s, filter 50 UPR Applies to ZEISS VAST XTR gold

ZEISS RDS-D Dynamic ZEISS RDS-D articulating unit for optical and contact sensors. Lateral swivel axis provides more advantages over articulating joints with front-to-back and lateral tilt axis; front-to-back and lateral tilt range of ±180°, large measuring range, rotation increments of 2.5°, CAA correction for automatic qualification for measuring multi-point sensors of all 20,736 angular positions. Scanning and multi-point sensor on ZEISS RDS-D. Scanning measuring rate up to 500 points/s. Stylus length with TL3 module = 30-150 mm; maximum sensor extension = 100 mm; maximum stylus weight =...

1) Depending on the reflection behavior of the surface. 2) The use of optical probes requires calibration with a contact probe (e.g. ZEISS VAST XXT).

Sensor overview VAST gold Passive Scanning Active Scanning Optical Scanning Roughness measurement Rotatable / tiltable Max. stylus length Technical features Length measuring system Glass ceramic length measuring system (with Y>2400 mm steel scales and automatic temperature compensation), 0.2 µm resolution Protection type Cooling system Accessories (optional) Increased permissible workpiece weight; High-dynamic Package (standard on all ZEISS ACCURA with X = 2000 mm), various control panels, Multisensor Rack to store stylus systems, rotary tables 1) Depending on the application, limiting the...

ZEISS ACCURA sizes Dimensions in mm Measuring range Overall CMM dimensions Working range (Max. workpiece size) height sembly port workpiece X axis Y axis Z axis Width Length Height Width Length Height Height Note: the given dimensions and weights are approximate values. Subject to change. Actual appearance of specific sizes may vary from illustration. Dimensioning based on DIN 4000-167:2009. 1) Applies to ZEISS VAST XT gold. The measuring range (G106) and the maximum workpiece height (B18) are reduced when other probes such as ZEISS VAST gold and ZEISS RDS are used, see sketch. 2) Lower...

ZEISS VAST gold ZEISS VAST XT gold ZEISS VAST XTR gold Measuring range start of ZEISS VAST XT gold 3 62 Note: the given dimensions and weights are approximate values. Subject to change. Actual appearance of specific sizes may vary from illustration. Dimensioning based on DIN 4000-167:2009. Environmental requirements Relative humidity Measuring reference temperature from Requirements for operational readiness Relative humidity Ambient temperature Conection data Electrical 1/N/PE 100/110/115/120/125/230/240 V VAC ~ (±10 %); 50-60 Hz (±3.5 %), Power consumption with TCC cabinet: max. 1600 VA,...

EN_60_022_0331XIX Printed in Germany.  CZ-V/ 2020 Subject to change in design and scope of delivery and as a result of ongoing technical development. Printed on chlorine-free bleached paper. © Carl Zeiss Industrielle Messtechnik GmbH Carl Zeiss Industrielle Messtechnik GmbH 73446 Oberkochen / Germany Sales: +49 7364 20-6336 Service: +49 7364 20-6337 Fax: +49 7364 20-3870 Email: info.metrology.de@zeiss.com Internet: www.zeiss.de/imt Carl Zeiss Industrial Metrology, LLC 6250 Sycamore Lane North Maple Grove, MN 55369/USA Phone: +1 763 744-2400 Fax: +1 763 533-0219 Email:...