Brochure Snow Blowers
8Pages

with Swiss Precision from ZAUGG

ZAUGG Snow Blowers Snow blowers from ZAUGG offer the right solution, adapted to the requirements, for every carrying vehicle. Thanks to the ZAUGG modular system, the basic configurations can be equipped with individual driving and operating equipment. The snow blower model to be used depends on the carrying vehicle. The ZAUGG snow blower is a combined/dual stage construction with cutter reels and an impeller. The two components are perfectly matched to each other via gearboxes and transmissions to enable effective and economical working. Cutter Ejection chute The cutters and the impeller...

ZAUGG Snow Blower SF 40 The ideal clearing device for single-axle vehicles and small tractors. The SF 40 is characterised by low weight and high manoeuvrability. The impeller is protected. Technical data SF 40-42 Power requirement Cutter  Impeller  Clearing widths ZAUGG Snow Blower SF 55 The SF 55 is ideally suited for use with small tractors or small implement carriers. It can be driven directly or via an inlet gear from the PTO as well as hydrostatically. The impeller is protected. The type SF 55-52 is equipped with lateral bearings from a width of 150 cm. Technical data SF 55-45 Power...

ZAUGG Snow Blower SF 72E The SF 72E is the simpler version of the type SF 72 with lateral bearings for the cutters. The cutters are protected by shear bolts and the unit is driven by PTO or hydrostatically. The SF72E is extendable. It can be equipped with various options (also as retrofits). Technical data SF 72E-70 Power requirement Cutter  Impeller  Clearing widths Ejection chutes: 2 flaps Snow Blower SF 72-70 KS The new ZAUGG snow blower SF 72-70 KS offers extended safety, additional comfort and an extremely favourable weight in view of its highly robust and sturdy construction. The...

Snow Blower SF 90 The SF 90 has the same features and characteristics as the robust SF 72. Protection against overload is provided by automatic cut-out clutches in the cutters. PTO or hydrostatic drive is possible. All the types are also available with hinged scraper blade. The type SF 90-100 is optionally equipped with a revolving impeller housing. Technical data SF 90-70 Power requirement Cutter  Impeller  Clearing widths Technical data SF 90-85 Power requirement Cutter  Impeller  Clearing widths Technical data SF 90-100 Power requirement Cutter  Impeller  Clearing widths Ejection...

The SF 90-100 HT is particularly light due to the materials used in its construction. Protection against overload is provided by cut-out clutches in the cutters and a shear bolt coupling in the cardan shaft. Thanks to the revolving impeller housing the snow can be directly ejected sideways. The centre of gravity and the weight have been dimensioned in such a way that the attachment guidelines and thus the axle load of the carrying vehicles can be complied with. The ejection chute tilt has been optimised to the extent that the front overhang can be maintained starting from the centre of the...

ZAUGG Rolba: the self-propelled Snow Blowers The Rolba model range, which has been developed further on the basis of soundly based and extensive experience, is of an outstanding quality and offers snow clearing capacities of up to 8000 t/h. Depending on the model the Rolbas are the ideal tool for the clearance of narrow roads, mountain passes and airport aprons. If required, the R500 can be prepared for multiple use. The new Rolba R500 is unique in terms of size and power. There are no comparable self-propelled snow blowers of this type and size on the market. If required, the R500 can be...

ZAUGG AG EGGIWIL is one of the world’s leading companies in the development and manufacture of high-end equipment for the clearance of snow from roads, railways and airports and the preparation of ski slopes. Technical specifications are subject to change without notice.