Features • Pinpoint addressability with superior detection compared to spot detectors • 40 addressable microbore tubes with individual sampling points • Assured detection with end to end system integrity monitoring • Interruption-free business operation with centralised testing and maintenance • Single sampling point or single tube blockage detection • Automatic sampling point presence and tube breakage detection • Automatic sampling point cleaning • Three sensitivity settings for the sampling points • Variable length capillary tubes, up to 100 m (330 ft) • Laser-based absolute smoke detection • Coarse particle filtering and clean air barrier for optics protection • Reliable linear pump technology • LEDs for alarm and fault signalling • 3.5” colour touch screen for status review • Seven programmable relays • Two GPIs, monitored and unmonitored • Xtralis VSC and VSM4 PC software support • iVESDA application for system monitoring on mobile devices • IP 40 enclosure (not UL tested) • Easy mounting with steel support bracket • Field replaceable filter, smoke sensor module, pump and rotary valve • VESDAnet networking • Ethernet 100BASE-T • WiFi, 802.11 b/g/n • Local host-mode USB port • Easy cable termination access • Event Log (20,000 events) Listings / Approvals • UL • ULC • EN 54-20, ISO 7240-20: Class A, B and C • Other major agency approvals pending Regional approvals listings and regulatory compliance vary between product models. Refer to www.xtralis.com for the latest product approvals matrix. The VESDA-E VEA series of detectors combine VESDA reliability and early warning smoke detection with pinpoint addressability and a variety of annunciation options that truly surpass traditional spot detectors. They use patented air sampling points and multi-channel microbore air-sampling with three alarm sensitivity settings for the sampling points. As a multi-channel addressable system, the VEA detector is able to divide a protected space into sampling locations, enabling the localization of potential sources of fire for faster incident response. The detectors are suitable for protection of areas where pinpoint location of fire events is essential, thus providing ideal fire detection solutions for healthcare, offices, education, retail, prisons and electrical cabinets. A wide range of features provide flexibility, field programmability, enhanced connectivity and reduced total cost of ownership. Installation, Commissioning and Maintenance The VEA detector features a robust IP40-rated enclosure and is equipped with a powerful pump that provides up to 100 m (330 ft) microbore tube length. It is fully supported by the Xtralis VSC software which facilitates ease of system commissioning and maintenance. During commissioning, the normalization process establishes the flow performance parameters. Local smoke test ports are used during servicing to verify that the system is fully operational. Field replaceable filter, smoke sensor module, pump and rotary valve components result in less down time and ease of maintenance. Color LCD display The VEA-040-A10 detector features a 3.5” colour LCD display which provides a range of status information including alarm and fault conditions as well as smoke level. Screens for each type of information are available using a simple navigation system. VESDAnet™ VESDA detectors and devices communicate on VESDAnet which provides a robust bi-directional communication network allowing continued redundant operation even during single point wiring failures. VESDAnet enables primary reporting, centralized configuration, control, maintenance and monitoring. Ethernet and WiFi connectivity VESDA-E detectors offer Ethernet and WiFi connectivity as standard features. The detector can be added to a corporate network, allowing WiFi enabled tablet devices and laptops installed with Xtralis configuration software to connect wirelessly to the detector via the network.

Supply Voltage * Product UL Listed between 0°C to 39°C (32°F to 102°F) Ordering Information Spare Parts VESDA-E VEA-40 Aspirating Smoke Detector with LEDs Refer to VEA Sampling Points data sheet (document # 29730) for more information regarding the sampling points. ** Contact your Xtralis regional office to check the availability of VEA-040-STX. VESDA-E VEA-40 Mounting Bracket How it works The VEA detector draws a combined air sample from a network of microbore flexible tubing from all sampling points in the protected area, then filters and analyzes the sample in laser detection chambers in the smoke...