Catalog excerpts
“ XE30” Series High Reliability Hybrid Microcircuit Crystal Oscillators 5.0V TTL, 5.0V HC/ACMOS, 3.3V, 2.5V & 1.8V LVHCMOS Ruggedized 4 Point Crystal Mount Tristate Output Option Radiation Tolerant to 10K Rads Low Profile Surface Mount, 0.140” Max. Height 100% Screening Options Low Phase Noise Hermetically Sealed, Ceramic Package Made in USA, ECCN: EAR99 High Shock & Vibration Applications Navigation Systems Aerospace Instrumentation Benign Space Applications Gun Launched Munitions Package Specifications & Outline: • Package : Ceramic 90% AL2 O3 Seal: Hermetic – Resistance Welded Weight: 0.8 Gms typical, 1.0 Gms Max. Thermal Resistance, Junction to Case ( θJC ): 30 oC / Watt Solder Reflow, Temp./Time: 260 oC, 10 Secs. Max. Lead Material & Finish: Kovar, 50 to 80 μ inches gold over 100 to 250 μ inches Nickel Tristate Input: A “Low” level at the input disables the Output into a high impedance state. Tristate Input has internal pull-up. It can be left floating or connected to Vdd. Hot Solder Tinning per MIL-PRF-55310 is optional at additional cost. Contact Xsis Electronics at xsis@xsis.com for any special requirements. ORDERING INFORMATION ( Please build your part number from options below ) : o Output Frequency 100% Screening Options Supply Voltage & Output Type 1 = 5.0V, TTL 2 = 5.0V, HC/ACMOS L = 3.3V, LVHCMOS N = 2.5V, LVHCMOS R = 1.8V, LVHCMOS 3.3V LVHCMOS, + 50 PPM over -55 C to +125 C, Tristate Output, 883B Screening and 24.000 MHz Tristate Options G = Tristate Blank = No Tristate M = 883B Screening H = HI-REL Screening Blank = No Screening HI-REL Screening is similar to * Frequency Stability Options 5, 6 & 7 are not available for all operating temperature ranges. Rev 09 / 22 ** Option 8 provides + 50 PPM Absolute accuracy with reference to the Nominal Frequency o includes initial accuracy at 25 C and + 10% Supply Voltage and + 10% load variation.
Open the catalog to page 1“ XE30” Series High Reliability Hybrid Microcircuit Crystal Oscillators 5.0V TTL, 5.0V HC/ACMOS, 3.3V, 2.5V & 1.8V LVHCMOS Electrical Specifications, 5V TTL & 5V HC/ACMOS Oscillators Parameter Output Frequency Range Frequency Accuracy at +25 o C Frequency Stability Vs Temperature See Ordering Information on Page 1 Operating Temperature Range See Ordering Information on Page 1 Input Current (no Load ) Output Waveform Square Wave Square Wave Output Duty Cycle Output High Level Output Load Rise & Fall Times ( Typical Load ) Tristate Input > 2.2V or Open : Normal Output Tristate Input < 0.8V:...
Open the catalog to page 2“ XE30” Series High Reliability Hybrid Microcircuit Crystal Oscillators 5.0V TTL, 5.0V HC/ACMOS, 3.3V, 2.5V & 1.8V LVHCMOS Electrical Specifications, 3.3V, 2.5V & 1.8V LVHCMOS Oscillators Parameter Output Frequency Range Frequency Accuracy at +25 C Frequency Stability Vs Temperature See Ordering Information on Page 1 Operating Temperature Range See Ordering Information on Page 1 3.3V + 10% Input Current (no Load ) Square Wave, LVHCMOS Compatible Output Waveform Output Duty Cycle (at 50% Output Level) Output High Level Output Load Rise & Fall Times ( Typical Load ) < 40 MHz 6 nS Max. > 40...
Open the catalog to page 3“ XE30” Series High Reliability Hybrid Microcircuit Crystal Oscillators 5.0V TTL, 5.0V HC/ACMOS, 3.3V, 2.5V & 1.8V LVHCMOS Packaging: Standard packaging is in ESD protective enclosed tray. Tape & Reel packaging is available at additional cost. Junction to case Thermal Constant ( θJC ): 30 C / Watt o Junction to Ambient ( Device floating in free air) Thermal Constant ( θJA ): 110 C / Watt Hi-Rel Screening: When HI-REL option is selected, Xsis Oscillators are subjected to 100% screening similar to Class “S” screening in accordance with MIL-PRF-55310. Refer to www.xsis.com additional details...
Open the catalog to page 4“ XE30” Series High Reliability Hybrid Microcircuit Crystal Oscillators 5.0V TTL, 5.0V HC/ACMOS, 3.3V, 2.5V & 1.8V LVHCMOS HCMOS Test Circuit HCMOS Output Waveform Power Supply E/D ( Enable/Disable ) Input has an internal pull-up resistor. It can be left floating or connected to Vdd. Typical Freq. Stability Vs. Temperature Tape & Reel Information FEEDING DIRECTION Typical Solder Reflow Profile 280 Ramp Down O 6 C/Sec. Max. Page 5 of 5 12620 W. 63rd St., Shawnee, KS 66216 Tel. 913-631-0448 Fax. 913-631-1170, www.xsis.com, email xsis@x
Open the catalog to page 5All Xsis Electronics catalogs and technical brochures
-
XE10-200A
4 Pages
-
T300
4 Pages
-
TR00
4 Pages
-
TN00
4 Pages
-
T3200
4 Pages
-
X3200
4 Pages
-
X200
4 Pages
-
E100
4 Pages
-
M100
4 Pages
-
XE15 – 200A
4 Pages
-
XE20-L00
4 Pages
-
XE20-200A
4 Pages
-
XE20 - 100
4 Pages
-
X100
4 Pages
-
XE102-200A
4 Pages
-
XE102-L00
4 Pages
-
XC5R
4 Pages
-
XC5N
4 Pages
-
XC5L
4 Pages
-
XC5A Oscillator
4 Pages