“ XE15 – 200A” Series ( AC/HCMOS ), 5.0 VDC High Reliability Hybrid Microcircuit Crystal Oscillators ( 100 KHz to 100 MHz, Enable / Disable Option on Pin 1 ) Ruggedized 4 Point Crystal Mount Tristate Output Option Radiation Tolerant to 10 Krads 100% Screening Options Low Phase Noise Hermetically Sealed Metal Package ECCN: EAR99 Pin 1 is identified with a Sq. Corner 1 Package Specifications & Outline: • • • • • • • • High Shock & Vibration Applications Navigation Systems Aerospace Instrumentation Industrial Controls Gun Launched Munitions Header & Leads Material: Kovar Cover Material: Nickel Seal: Hermetic – Resistance Welded Weight: 2.5 Gms typical, 3.0 Gms Max. o Thermal Resistance, Junction to Case ( θJC ): 35 C / Watt o Lead Soldering, Temp./Time: 260 C, 10 Secs. Max. Header Finish: 100 to 250 μ inches nickel Lead Finish: 50 to 80 μ inches gold over 100 to 250 μ inches nickel level at the input disables the Output into a high impedance state. E/D Input has internal pull-up. It can be left floating or connected to Vdd. Hot Solder Tinning per MIL-PRF-55310 is optional at additional cost. Contact Xsis Electronics at [email protected] for any special requirements. ORDERING INFORMATION ( Please build your part number from options below ) : o Output Frequency Frequency Stability Options 1 = + 0.1% 2 = + 500 PPM 5.0V HC/ACMOS, + 50 PPM over -55 C to +125 C, Tristate Output, Mil Screening, 24.000 MHz * Frequency Stability Options 5, 6 & 7 are not available for all operating temperature ranges. Xsis Electronics, Inc., 12620 W. 63rd St., Shawnee, KS 66216 Tristate Options M = Mil - Screening H = HI-REL Screening Blank = No Screening G = Tristate Blank = No Tristate HI-REL Screening is similar to

“ XE15 – 200A” Series ( AC/HCMOS ), 5.0 VDC High Reliability Hybrid Microcircuit Crystal Oscillators ( 100 KHz to 100 MHz, Enable / Disable Option on Pin 1 ) Electrical Specifications: Parameter Specification Limits Output Frequency Range Frequency Stability Vs Temperature See Ordering Information on Page 1 Operating Temperature Range See Ordering Information on Page 1 Input Current (no Load ) Output Waveform Square Wave, HC/ACMOS & TTL Compatible < 40 MHz 55/45% Max. > 40 MHz 60/40% Max. Output Duty Cycle ( at 1.4V Output Level ) Output High Level Output Load Output Drive Capability 50 pF at...

“ XE15 – 200A” Series ( AC/HCMOS ), 5.0 VDC High Reliability Hybrid Microcircuit Crystal Oscillators ( 100 KHz to 100 MHz, Enable / Disable Option on Pin 1 ) ESD protective conductive foam tray. Junction to case Thermal Constant ( θJC ): 35 C / Watt o Junction to Ambient ( Device floating in free air) Thermal Constant ( θJA ): 95 C / Watt Hi-Rel Screening: When HI-REL option is selected, Xsis Oscillators are subjected to 100% screening similar to Class “S” screening in accordance with MIL-PRF-55310. Refer to www.xsis.com for additional details about HI-REL screening. Typical Phase Noise (dbc/Hz):...

“ XE15 – 200A” Series ( AC/HCMOS ), 5.0 VDC High Reliability Hybrid Microcircuit Crystal Oscillators ( 100 KHz to 100 MHz, Enable / Disable Option on Pin 1 ) HCMOS Test Circuit HCMOS Output Waveform Power Supply E/D ( Enable/Disable ) Input has an internal pull-up resistor. It can be left floating or connected to Vdd. Typical Freq. Stability Vs. Temperature 50 Xsis Electronics, Inc., 12620 W. 63rd St., Shawnee, KS 66216 Page 4 of 4 Tel. 913-631-0448 Fax. 913-631-1170, www.xsis.com, email xsis