XE102-200A
4Pages

“ XE102-200A ” Series ( HC/ACMOS), 5.0 VDC High Reliability Hybrid Microcircuit Crystal Oscillators ( Surface Mount “ Gull Wing Leads ” Package ) Ruggedized 4 Point Crystal Mount Tristate Output Option Radiation Tolerant to 10K Rads 100% Screening Options Low Phase Noise Hermetically Sealed, Ceramic Package ECCN: EAR99 High Shock & Vibration Applications Navigation Systems Aerospace Instrumentation Benign Space Applications Gun Launched Munitions Package Specifications & Outline: • • • • • • • Dimensions: Package: Ceramic 90% AL2 O3 Seal: Hermetic – Resistance Welded Weight: 0.9 Gms typical, 1.2 Gms Max. o Thermal Resistance, Junction to Case ( θJC ): 30 C / Watt o Solder Reflow, Temp./Time: 260 C, 10 Secs. Max. Terminations Material: Copper, Alloy 102 Terminations Finish: 63/37 hot solder Tinning, 100 μ inches minimum E/D ( Enable/Disable ) Input: A “Low” level at the input disables the Output into a high impedance state. E/D Input has internal pull-up. It can be left floating or connected to Vdd. Hot Solder Tinning per MIL-PRF-55310 is optional at additional cost. Contact Xsis Electronics at xsis@xsis.com for any special requirements. ORDERING INFORMATION ( Please build your part number from options below ) : o Output Frequency Frequency Stability Options 1 = + 0.1% 2 = + 500 PPM 5.0V HC/ACMOS, + 50 PPM over -55 C to +125 C, Tristate Output, 883B Screening, 24.000 MHz * Frequency Stability Options 5, 6 & 7 are not available for all operating temperature ranges. Xsis Electronics, Inc., 12620 W. 63rd St., Shawnee, KS 66216 Tristate Options 883B = Mil - Screening H = HI-REL Screening Blank = No Screening G = Tristate Blank = No Tristate HI-REL Screening is similar to

“ XE102-200A ” Series ( HC/ACMOS), 5.0 VDC High Reliability Hybrid Microcircuit Crystal Oscillators ( Surface Mount “ Gull Wing Leads ” Package ) Electrical Specifications: Parameter Specification Limits Output Frequency Range Frequency Stability Vs Temperature See Ordering Information on Page 1 Operating Temperature Range See Ordering Information on Page 1 Input Current (no Load ) Output Waveform Square Wave, HC/ACMOS Compatible < 30 MHz 55/45% Max. > 30 MHz 60/40% Max. Output Duty Cycle ( at 50% Output Level ) Output High Level Output Load Rise & Fall Times ( Typical Load ) E/D Input >...

“ XE102-200A ” Series ( HC/ACMOS), 5.0 VDC High Reliability Hybrid Microcircuit Crystal Oscillators ( Surface Mount “ Gull Wing Leads ” Package ) Packaging: ESD protective Enclosed tray. Tape & Reel packaging is available at additional cost. Thermal Characteristics: o Junction to case Thermal Constant ( θJC ): 30 C / Watt o Junction to Ambient ( Device floating in free air) Thermal Constant ( θJA ): 110 C / Watt Hi-Rel Screening: When HI-REL option is selected, Xsis Oscillators are subjected to 100% screening similar to Class “S” screening in accordance with MIL-PRF-55310. Refer to...

“ XE102-200A ” Series ( HC/ACMOS), 5.0 VDC High Reliability Hybrid Microcircuit Crystal Oscillators ( Surface Mount “ Gull Wing Leads ” Package ) HCMOS Test Circuit HCMOS Output Waveform Power Supply E/D ( Enable/Disable ) Input has an internal pull-up resistor. It can be left floating or connected to Vdd. Typical Freq. Stability Vs. Temperature Tape & Reel Information FEEDING DIRECTION Typical Solder Reflow Profile 280 Ramp Down 6 OC/Sec. Max. Xsis Electronics, Inc., 12620 W. 63rd St., Shawnee, KS 66216 Page 4 of 4 Tel. 913-631-0448 Fax. 913-631-1170, www.xsis.com, email xs