“XC5L” Series, LVHCMOS, 3.3V High Reliability Hybrid Microcircuit Crystal Oscillators ( 7.5 KHz to 160 MHz ) High Shock & Vibration Design Tristate Output Option Low Profile Surface Mount, 0.079” Max. Height 100% Screening Options Low Phase Noise Hermetically Sealed, Ceramic Package Tape & Reel packaging ECCN: EAR99 High Shock & Vibration Applications Navigation Systems Aerospace Instrumentation Digital Signal Processing Gun Launched Munitions Package Specifications & Outline: • • • • • • Package: Ceramic 90% AL2 O3, Seal: Hermetic – Resistance Welded Weight: 0.15 Gms Typical, 0.2 Gms Max. Thermal Resistance, Junction to Case ( θJC ): 38 oC / Watt Solder Reflow, Temp./Time: 260 oC Max for 10 Seconds Max. Pad Finish: 0.3 to 1.0 μm gold over 1.27 to 8.9 μm nickel An External 0.01uF Bypass Capacitor is required between VDD and GND. Hot Solder Tinning per MIL-PRF-55310 is optional at additional cost. Contact Xsis Electronics at [email protected] for any special requirements. E/D ( Enable/Disable ) Input: A “Low” level at the input disables the Output into a high impedance state. E/D Input has internal pull-up. It can be left floating or connected to Vdd. ORDERING INFORMATION ( Please build your part number from options below ) : o Output Frequency * Overall Frequency Accuracy Options o 1 = + 50 PPM over -10 C to +70 C 2 = + 25 PPM over -10 C to +70 C 3 = + 100 PPM over -40 C to +85 C 4 = + 50 PPM over -40 C to +85 C 5 = + 25 PPM over -40 C to +85 C 6 = + 100 PPM over -55 C to +125 C 7 = + 75 PPM over -55 C to +125 C 3.3 V LVHCMOS, + 75 PPM Overall Frequency Accuracy over -55 C to +125 C, 55/45% Symmetry, Tristate Output , 100% Screening, 24.000 MHz Symmetry & Tristate Options A = 60/40% & Tristate B = 55/45% & Tristate X = No Screening M = 100% Screening MP = Enhanced Reliability Screening * Overall Frequency Accuracy includes initial Accuracy & Frequency changes due to Temperature, Aging, Supply Voltage & Load variations.

“XC5L” Series, LVHCMOS, 3.3V High Reliability Hybrid Microcircuit Crystal Oscillators ( 7.5 KHz to 160 MHz ) Electrical Specifications: Parameter Output Frequency Range Overall Frequency Accuracy (See Note Below) See Options in the Ordering Information on Page 1 Operating Temperature Range See Options in the Ordering Information on Page 1 Input Current (no Load ) Output Waveform Square Wave, LVHCMOS Compatible Output Duty Cycle - HCMOS (at 50% Level ) See Options in the Ordering Information on Page 1 Output High Level Output Load Rise & Fall Times ( Typical Load ) Enable/Disable ( E/D) Input...

“XC5L” Series, LVHCMOS, 3.3V High Reliability Hybrid Microcircuit Crystal Oscillators ( 7.5 KHz to 160 MHz ) Packaging: Tape & Reel, See Page 4 Thermal Characteristics: Junction to case Thermal Constant ( θJC ): 38 oC / Watt Junction to Ambient ( Device floating in free air) Thermal Constant ( θJA ): 135 oC / Watt Typical Phase Noise (dbc/Hz): Output Frequency Environmental Specifications: XC5L series oscillators are designed to meet or exceed the Environmental tests specified below. Customized screening and environmental testing are also available to meet your special requirements. Test Test...

“XC5L” Series, LVHCMOS, 3.3V High Reliability Hybrid Microcircuit Crystal Oscillators ( 7.5 KHz to 160 MHz ) HCMOS Test Circuit HCMOS Output Waveform Power Supply E/D ( Enable/Disable ) Input has an internal pull-up resistor. It can be left floating or connected to Vdd. Typical Freq. Stability Vs. Temperature Tape & Reel Information FEEDING DIRECTION Typical Solder Reflow Profile 280 Ramp Down O 6 C/Sec. Max. Time - Seconds Page 4 of 4 12620 W. 63rd St., Shawnee, KS 66216 Tel. 913-631-0448 Fax. 913-631-1170, www.xsis.com, email xsis@x