PCT1
5Pages

{{requestButtons}}

Catalog excerpts

PCT1 - 1

PCT1 Technical Datasheet General Description! Note: This datasheet applies only to PCT1-POE and PCT1 -ASP product revisions RevAC and above. Electrical Characteristics PCT1-POE: • (J1) Power over Ethernet, Class 0 IEEE 802.3af, Mode A, nominal 48 V galvanically isolated PCT1-ASP: • (J1) Power over Ethernet, Class 0 Power supply IEEE 802.3af, Mode A, nominal 48 V galvanically isolated • (J2) Auxiliary supply 12...36 VDC, -20% / +25%, protected against reverse polarity 10ms interruption bridging Power consumption Maximum 6.0 W, 0.125 A (PoE), 0.5 A (12V AUX)

Open the catalog to page 1
PCT1 - 2

Physical Interfaces

Open the catalog to page 2
PCT1 - 3

PCT1 Technical Datasheet Installation /

Open the catalog to page 3
PCT1 - 4

PCT1 Technical Datasheet MTBF Results PCT1- MTBF Calculation based on IEC 61709:2017 (SN 29500:2014 for stationary use at weather protected locations (E1) for mean component ambient temperatures. MTBF Calculation based on IEC 61709:2017 (SN 29500:2014 for portable and non-stationary use, ground vehicle installation (E3) for mean component ambient temperatures.

Open the catalog to page 4
PCT1 - 5

PCT1 Technical Datasheet Published by Xovis AG Industriestrasse 1 CH-3052 Zollikofen +41 32 342 04 70 info@xovis.com www.xovis.com Copyright reminder © 2023 Xovis AG, Switzerland. All rights reserved. No part of this publication may be reproduced, stored in a retrieval system, or transmitted, in any form by any means, electronic, mechanical, photocopying, recording, or otherwise, without the prior written permission of the publisher. Printed and published in Switzerland. While Xovis AG believes the information included in this publication is correct as of the date of publication, it is...

Open the catalog to page 5

All XOVIS AG catalogs and technical brochures

  1. PC2SE-O

    3 Pages

  2. PC3SE

    3 Pages

  3. PC2RE

    3 Pages

  4. PC2SE

    3 Pages