XEBRID 1-C10-G10
1 / 2 PagesView full catalog
XEBRID 1-C10-G10
Product catalog summary
Product Overview:
XEBRID 1-C10-G10 is a composite material consisting of 10% carbon fiber and 10% glass fiber reinforced PA66. It is designed for applications requiring enhanced mechanical and thermal properties.
XEBRID 1-C10-G10 is a composite material consisting of 10% carbon fiber and 10% glass fiber reinforced PA66. It is designed for applications requiring enhanced mechanical and thermal properties.
Physical Properties:
- Density: 1.25 g/cm3 (ISO 1183)
- Water absorption values are not specified.
- Post-shrinkage values are not specified.
Mechanical Properties:
- Tensile Modulus: 12000 MPa (ISO 527)
- Tensile Strength at break: 180 MPa (ISO 527)
- Tensile Elongation at break: 2.2% (ISO 527)
- Flexural Modulus: 9500 MPa (ISO 178)
- Flexural Strength: 260 MPa (ISO 178)
- Notched Izod Impact Strength at 23°C: 6 kJ/m2 (ISO 180)
- Unnotched Izod Impact Strength at 23°C: 38 kJ/m2 (ISO 180)
Thermal Properties:
- HDT at 8.00 MPa: 190°C (ISO 75)
- VICAT Softening Temperature at 50 N: 250°C (ISO 306)
Electrical Properties:
- Volume Resistivity: 1E–01 Ohm*m (IEC 60093)
- Surface Resistivity: 1E+05 Ohm (IEC 60093)
Processing Recommendations:
- Drying Temperature: 80 – 100°C
- Drying Time: 6 – 8 hours
- Melt Temperature: 260 – 270°C
- Mould Temperature: 85°C
Additional Notes:
- Users must verify the suitability of the material for their specific applications.
- Processing conditions can significantly affect material properties.
- Ensure proper ventilation during processing to avoid health risks from decomposition products.
Disclaimer:
The information provided is based on standardized test conditions and should be used as a guide. Actual performance may vary based on processing conditions and design.
The information provided is based on standardized test conditions and should be used as a guide. Actual performance may vary based on processing conditions and design.
See more
Catalog excerpts
Surface Resistivity
Open the catalog to page 1
XEBRID 1-C10-G1010% carbon fiber and 10% glass fiber reinforced PA66 Process Recommendation Test Condition Standard Unit Value Drying temperature Drying time Melt temperature Mould temperature Our advice does not release you from the obligation to verify the information currently provided - especially that contained in our safety data and technical information sheets, and to test our products as to their suitability for the intended processes and uses. The application, use and processing of our products and the products manufactured by you on the basis of our technical advice are...
Open the catalog to page 2All XENIA SRL catalogs and technical brochures
XEGLASS 12-G50-HT2 Pages
XECARB® 4-C10-XY2 Pages
XECARB® 1-C202 Pages
XECARB® 1-C102 Pages
*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.