Beacon Tester Ultra Rugged! • All BT100 and BT100AV series Beacon Testers are available in the ruggedized version! • Perfect for marine or any rough environment! • This Tester can handle the toughest field conditions. It meets MIL-STD-810F standards for drops, vibration and temperature extremes, and it has an IP67 rating—meaning it's impervious to dust and water immersion. Specificaltions: PHYSICAL Size: Weight: ENVIRONMENT Operating temperature: Storage temperature: Temperature shock: Humidity: Water: Drop: Sand and dust: Vibration: Altitude: ELECTRICAL Processor: Memory: Storage: Display: Batteries: I/O Ports: -10° to 60° C (14° to 140° F) -40° to 70° C (-40° to 158° F) MIL-STD-810F, Method 503.4 MIL-STD-810F, Method 507.4 IP67, sealed against accidental immersion (1 m for 30 min.) MIL-STD-810F, Method 512.4, Procedure I MIL-STD-810F, Method 516.5, Procedure IV 26 drops from 1.22 m (4 ft) onto plywood over concrete, 6 additional drops at -30° C (-22° F), 6 additional drops at 60° C (140° F) IP67, MIL-STD-810F, Method 510.4, Procedure I MIL-STD-810F, Method 514.5, Procedure I (Fig. 17) & II MIL-STD-810F, Method 500.4, Procedures I, II & III 15,000 ft at 23° C (73° F) Intel PXA255 XScale CPU 200 MHz 64 MB high-speed SDRAM (~22 MB reserved) Onboard nonvolatile NAND Flash 128 MB (~31 MB reserved) 240x320 pixel (1/4 VGA) color TFT with LED front light 3800 mAh NiMH rechargeable pack 406 MHz direct input 50Ω, 9-pin serial port—RS232 (115 Kbps), USB client, DC power port Note: All S versions must have cap removed to connect 10 MHz reference. Over 12 hours of testing in one battery charge! © 2008 WS Technologies Inc. Ordering Information: BT100 series: 910-BT100A-R 910-BT100S-R WS Technologies Inc. Kelowna, BC CANADA [email protected] www.wst.ca