BT100
2Pages

testing are operating properly! Whether you are testing EPIRBs for IMO’s Shore-Based Maintenance requirements or verifying the coding on PLBs, the BT100 is the perfect tool. This tester packs a whole lot of measurement capability into a very small package. Use this instrument for all of your Beacon testing needs ... even for troubleshooting! In fact, the majority of beacon manufacturers are using this instrument on their production lines! The BT100 series works on all existing 406 EPIRBs, all 406 PLB’s, and all ELT’s ... also measures any 121.5 MHz equipment! FEATURES INCLUDE • easy to use software ... very intuitive! • receives all Cospas-Sarsat frequency channels and protocols (EPIRBs, PLBs, and ELTs,) • measures all RF parameters and modulation details • powerful 406 MHz graphic measurements for power, phase modulation and in-band spectrum • internal antenna receives 406 burst from very close to15 meters away, or connect directly - no attenuator needed • add text comments or audio comments to each measurement • user-defined cable loss factor • simple or detailed measurement mode • easy to use file system • store hundreds of measurements • produces printable Test Report • includes detailed calibration data with each Certificate of Calibration • recommended 2 year calibration cycle • currently in use throughout the world • outstanding customer support -1.11 +1.12 rads | Symmetry 0.4% Rise Time 188 uS | Fall Time 178 uS Power Rise Time: < 5 ms Power at Marker: 36.6 dBm Exceeds IMO MSC/Circ. 1039 and MSC/Circ. 1040 requirements. Discover the power of the this tester for yourself ... try the online interactive demo at www.wst-inc.ca

* User must supply a stable 10MHz Reference Signal Specifications subject to change without notice.