Exhibit with us
*myaeroexpo  
English
  1. Catalogs
  2. Winter Markiertechnik GmbH
  3. WTE 3200

WTE 3200

WTE 3200
1 / 1 PageView full catalog

WTE 3200

Product catalog summary
Product Overview: The WTE 3200 is a road marking truck designed for efficient road marking operations. It is built on a Mercedes Benz AXOR 2640L 6×2 chassis with a wheelbase of 4500 mm.
Specifications:
  • Line Guide: Connected to steering with pneumatic lifting.
  • Compressor: Boge, providing an effective air supply of 1.3 m³/min at 7 bar.
  • Thermoplastic Preheater: Two units of 1200 liters each, equipped with agitators.
  • Thermoplastic Container: 800 liters, with agitator.
  • Heating: Thermal oil heating available on request, powered by gas or diesel.
  • Hydraulic Power Station: Hatz 3L41C, supersilent model.
  • Glass Bead Pressure Tank: 500 liters, upright mounted.
  • Extruder: Located on both sides with automatic thickness control; multi-flap extruder heads available on request.
  • Outrigger/Marker Units: Mechanically foldable with pneumatic lifting, located on both sides.
  • Operator Section: Positioned near the outrigger with a panel containing all necessary instruments.
  • Glass Bead Equipment: Available on request.
  • Weight: Empty weight is approximately 17,500 kg, and total weight is approximately 25,000 kg.
  • Dimensions: Length x Width x Height is approximately 9.80 m x 2.50 m x 3.50 m.
Additional Information: The document reserves the right for technical modifications and states the current state of the art as of November 1, 2014.
See more

Catalog excerpts

WTE 3200-1

Powered by TCPDF (www.tcpdf.org) Road marking truck Machine type Truck type Wheel base Line guide Compressor Thermoplastic preheater Thermoplastic container Thermal oil heating Hydraulic power station Glass bead pressure tank Extruder Extruder heads Outrigger / marker units Operators section Glass bead equipment Empty- / total weight Dimensions Length x width x height Right of technical modifications reserved Road marking truck WTE 3200 Mercedes Benz AXOR 2640L 6×2 4500 mm connected to stearing, pneumatic lifting Boge, effective air supply 1,3 m³/min at 7 bar 2x 1.200 ltr., with agitator 800 ltr., with agitator on request gas or diesel Hatz 3L41C, supersilent 500 ltr., upright mounted right and left hand side, automatic thickness control on request, also multi flap extruder heads right and left hand side, mechanically foldable, pneumatic lifting right and left, near outrigger, panel with all necessary instruments on request approx. 17500 kg / 25000 kg approx. 9,80 m x 2,50 m x 3,50 m State of art: 01.11.2014_en Handelsregister HR Siegen HRB 7910 | UST.-IdNr: De 146196739 | Geschäftsführer: Dipl.-Kfm. Stefan Forberger, Dipl.-Ing Ralf Vogelsang, Dipl.-Ing Helmut Winter

 Open the catalog to page 1

All Winter Markiertechnik GmbH catalogs and technical brochures

  1. Manual screed box – version W
    Manual screed box – version W

    2  Pages

  2. WP 25/48
    WP 25/48

    2  Pages

  3. TOPLINER 100P Airless
    TOPLINER 100P Airless

    2  Pages

  4. WKP 251 light
    WKP 251 light

    2  Pages

  5. WKP 251 GTLR
    WKP 251 GTLR

    2  Pages

  6. WPT 251 GTLR Kombi
    WPT 251 GTLR Kombi

    2  Pages

  7. WTE 351 GTLR
    WTE 351 GTLR

    2  Pages

  8. WT 351 GTLR
    WT 351 GTLR

    2  Pages

  9. PeelJet® / TrackJet®
    PeelJet® / TrackJet®

    6  Pages

  10. WTE 850
    WTE 850

    1  Page

  11. WTSE 800
    WTSE 800

    1  Page

  12. WTE 1500
    WTE 1500

    1  Page

  13. Unimog
    Unimog

    1  Page

  14. GP 2000 Airless
    GP 2000 Airless

    1  Page

  15. WP 3000 Airless
    WP 3000 Airless

    1  Page

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.