Exhibit with us
*myaeroexpo  
English
  1. Catalogs
  2. Winter Markiertechnik GmbH
  3. WTE 1500

WTE 1500

WTE 1500
1 / 1 PageView full catalog

WTE 1500

Product catalog summary
Product Overview: The document provides technical specifications for the WTE 1500 road marking truck, manufactured by Gruen GmbH. The truck is based on the MAN CLA 16.222 model.
Specifications:
  • Wheel Base: 4300 mm
  • Compressor: Boge, with an effective air supply of 1.5 m³/min at 7 bar
  • Thermoplastic Preheater: Two units of 500 liters each, equipped with agitators
  • Thermoplastic Container: 450 liters, with agitator
  • Heating: Thermal oil heating available on request, powered by gas or diesel
  • Hydraulic Power Station: Hatz 3L41C, supersilent
  • Glass Bead Pressure Tank: 300 liters, upright mounted
  • Extruder: Automatic thickness control, available on both right and left sides, with optional multi-flap extruder heads
  • Outrigger/Marker Units: Mechanically foldable with pneumatic lifting, available on both sides
  • Operator Section: Located near the outrigger, equipped with all necessary instruments
  • Weight: Empty weight approximately 12,000 kg, total weight approximately 16,000 kg
  • Dimensions: Length x Width x Height approximately 9.20 m x 2.50 m x 3.50 m
Additional Information: The document notes that technical modifications are reserved, and the state of the art is as of March 14, 2016.
See more

Catalog excerpts

WTE 1500-1

Powered by TCPDF (www.tcpdf.org) Road marking truck Machine type Truck type Wheel base Line guide Compressor Thermoplastic preheater Thermoplastic container Thermal oil heating Hydraulic power station Glass bead pressure tank Extruder Extruder heads Outrigger / marker units Operators section Glass bead equipment Empty- / total weight Dimensions Length x width x height Right of technical modifications reserved Road marking truck WTE 1500 MAN CLA 16.222 4300 mm connected to stearing, pneumatic lifting Boge, effective air supply 1,5 m³/min at 7 bar 2x 500 ltr., with agitator 450 ltr., with agitator on request gas or diesel Hatz 3L41C, supersilent 300 ltr., upright mounted right and left hand side, automatic thickness control on request, also multi flap extruder heads right and left hand side, mechanically foldable pneumatic lifting right and left, near outrigger, panel with all necessary instruments on request approx. 12000 kg / 16000 kg approx. 9,20 m x 2,50 m x 3,50 m State of art: 14.03.2016_en Handelsregister HR Siegen HRB 7910 | UST.-IdNr: De 146196739 | Geschäftsführer: Dipl.-Kfm. Stefan Forberger, Dipl.-Ing Ralf Vogelsang, Dipl.-Ing Helmut Winter

 Open the catalog to page 1

All Winter Markiertechnik GmbH catalogs and technical brochures

  1. Manual screed box – version W
    Manual screed box – version W

    2  Pages

  2. WP 25/48
    WP 25/48

    2  Pages

  3. TOPLINER 100P Airless
    TOPLINER 100P Airless

    2  Pages

  4. WKP 251 light
    WKP 251 light

    2  Pages

  5. WKP 251 GTLR
    WKP 251 GTLR

    2  Pages

  6. WPT 251 GTLR Kombi
    WPT 251 GTLR Kombi

    2  Pages

  7. WTE 351 GTLR
    WTE 351 GTLR

    2  Pages

  8. WT 351 GTLR
    WT 351 GTLR

    2  Pages

  9. PeelJet® / TrackJet®
    PeelJet® / TrackJet®

    6  Pages

  10. WTE 850
    WTE 850

    1  Page

  11. WTSE 800
    WTSE 800

    1  Page

  12. WTE 3200
    WTE 3200

    1  Page

  13. Unimog
    Unimog

    1  Page

  14. GP 2000 Airless
    GP 2000 Airless

    1  Page

  15. WP 3000 Airless
    WP 3000 Airless

    1  Page

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.