- Catalogs
- Winter Markiertechnik GmbH
- WP 3000 Airless
WP 3000 Airless
WP 3000 Airless
- Compressor: Kaeser Typ M42, providing an effective air supply of 4.25 m³/min at 7 bar.
- Paint Pressure Tank: Two tanks of 1500 liters each, equipped with hydraulically driven agitators and a 750 cm² paint sieve for easy cleaning.
- Glass Bead Pressure Tank: Two upright tanks of 850 liters each, designed for easy cleaning.
- Cleaning System: Features a 100-liter capacity high-pressure cleaning liquid pump.
- Paint Pump: Airless pump with a capacity of 35 liters/min, pneumatically operated with a piston-type accumulator and pulsation damper.
- Outrigger/Marker Units: Located on both sides, with 600 mm hydraulic side access and pneumatic lifting.
- Operator Section: Positioned near the outrigger with a panel containing all necessary instruments.
- Additional Equipment: Optional paint spray guns and glass bead equipment, with a paint filling pump capacity of 300 liters/min.
- Weight and Dimensions: Empty weight is approximately 17,200 kg, total weight is 25,000 kg, and dimensions are approximately 8.95 m in length, 2.34 m in width, and 3.50 m in height.
Catalog excerpts
Powered by TCPDF (www.tcpdf.org) Road marking truck Machine type Truck type Wheel base Line guide Compressor Paint pressure tank Glass bead pressure tank Cleaning system Paint pump Outrigger / marker units Operators section Paint spray guns Glass bead equipment Additional equipment Empty- / total weight Dimensions Length x width x height Road marking truck WP 3000 Airless Mercedes Benz Axor 2533 L4x2 4200 mm, second rear axle hydraulically controlled connected to stearing, pneumatic lifting Kaeser Typ M42, effective air supply 4,25 m³/min at 7 bar 2x 1500 ltr., with hydraulically driven agitator, side entrance 30 2x 850 ltr., upright mounted, side entrance 240 mm , for easy c 100 ltr. filling capacity, high pressure cleaning liquid pump Airless 35 ltr./min, pneumatically operated, piston-type accumu right and left hand side, 600 mm hydraulic side access, pneum right and left, near outrigger, panel with all necessary instrumen on request on request Paint filling pump 300 ltr./min approx. 17200 kg / 25000 kg approx. 8,95 m x 2,34 m x 3,50 m Right of technical modifications reserved Handelsregister HR Siegen HRB 7910 | UST.-IdNr: De 146196739 | Geschäftsführer: Dipl.-Kfm. Stefan Forberger, Dipl.-Ing Ralf Vogelsang, Dipl.-Ing Helmut Winter
Open the catalog to page 1All Winter Markiertechnik GmbH catalogs and technical brochures
WP 25/482 Pages
TOPLINER 100P Airless2 Pages
WKP 251 light2 Pages
WKP 251 GTLR2 Pages
WPT 251 GTLR Kombi2 Pages
WTE 351 GTLR2 Pages
WT 351 GTLR2 Pages
PeelJet® / TrackJet®6 Pages
WTE 8501 Page
WTSE 8001 Page
WTE 15001 Page
WTE 32001 Page
Unimog1 Page
GP 2000 Airless1 Page
