Corrosion Alternating Test Chambers SaltEvent SC
6Pages

Illustration is similar, contains options Corrosion Alternating Test Chambers Salt Event SC

Test whatever you like. Perfection in performance, equipment and design. From boot to bonnet – in research, development and quality control, you won’t want to take any chances. We’ll support you. Corrosion Alternating Test Chambers Salt  vent SC. E Reliable measurement results are possible thanks to: Completely thought through. • Optimal spray mist distribution due to a precision We know what matters for your tests: reliable, precise and reproducible results. That’s why we two-component nozzle • Extremely stable temperatures due to a double-shell design our test chambers to meet exactly...

More equipment, right from the start. Basic equipment setting standards. Exterior • Everything is sealed The hood and test chamber are hydrostatically sealed using a U-shaped profile. The resulting groove is automatically filled with demineralised water and prevents salt spray from getting into the laboratory – safely and permanently. Interior • tay flexible S The brine solution required for the tests is stored in a removable, portable brine tank. This tank is easy to clean and can be fully disconnected without using any tools if required. • Test more The specimen can be distributed on the...

Tailor-made testing. Convincing technology. Reliable results. Optional equipment for individual solutions. The performance data at a glance: Height with hood Width with spray duct Test space volume Using a ventilation system complying with DIN 50014-5, the corrosive test chamber air can be removed from the test chamber. Exterior housing dimensions1 Height  Temperature range • Precise measurements Salt spray test the test space. The mean value of the precipitation rate is displayed and updated throughout the test. 5 K above ambient temperature up to +50 °C Condensed water test You can...

Become more efficient The performance data at a glance: Our solutions will save you time and money. Type ’Production-related tolerances of up to ±10 mm are possible. 2The evidence of temperature stability takes place at ambient temperature of +23 °C ±2 K in the middle of the test space when this is empty and in a steady state, without specimen, heat radiation and optional equipment. 3At 0 °C and 1 bar. 4Factory calibration. The performance data refer to +23 °C ±2 K ambient temperature, 230 V/50 Hz nominal voltage, without specimen and without optional equipment. The permitted ambient...

weisstechnik Test it. Heat it. Cool it. Our solutions are deployed around the world in research, development, production and quality assurance of numerous products. Our experts from 22 companies are at your service in 15 countries at 40 locations. They provide optimum support and ensure high operational reliability of your systems. Weiss Umwelttechnik and Vötsch Industrietechnik are among the most innovative and significant manufacturers of environmental simulation systems. With these testing systems, we can simulate all climatic conditions around the globe and beyond, under accelerated...