Diverter Valve St. Ives, Cambs. PE27 3LZ, UK Tel: +44 (0) 1480 397 400 [email protected] A Diverter Valve provides an alternative to the standard directional control valve when a neutral (centre) position is not required. It allows flow to be directed into either of two lines which enables fast changing from one system to another, or from one system to tank thus providing an idling circuit. Other applications may be as a safety lock preventing accidental operation of separate functions which should not operate together and the selection of attachments as on a farm tractor. Specifications Maximum Working Pressure: 210 bar Maximum Flow: 80 lpm Porting: See Table 2, ordering codes Material: Stainless steel spool in cast iron body Weight: 2 kg (approx.) Mounting: Two bolt Symbol For valve model number SV80-A-J-S (see ordering codes) Features • Flow may be directed by mechanically pushing the spool with spring offset or by a mechanical push pull operation in which case the valve stem is threaded or fitted with a moulded knob. • Customer can select from one of two spool types allowing flow to be diverted from one line to another or from system to tank. • A choice of port threads are available. • Special versions also available. Hydraulic measurement and control

Ordering Codes Typical Code Basic Valve Spool Type (Table 1) Porting (Table 2) Operation (Table 3) Table 1: Spool Type Code Spool Type Code Operation Code Porting Spring Offset, Mechanical Push Manual, Push - Pull Threaded, Push - Pull Installation Details Dimensions in millimetres ‘A’ Spool - Inlet to Port ‘A’ in position shown below ‘B’ Spool - All Ports closed in position shown below Threaded Push, Pull Type 29 Manual Push, Pull Type Spring Offset Type Webtec reserve the right to make improvements and changes to the specif