Technical Datasheet Turboloader Sil Aramid Applications It is especially recommended in turbocharger systems for industrial vehicles, due to its high capacity to withstand hydrocarbons and oil particles in the cooling pressurized air. Available with or without wall reinforcing stainless steel rings. This reference is manufactured with aramid textile reinforcements and the silicone rubber compound is VMQ type (Vinyl-Methyl Quality). The inner layer can be made of FVMQ (Fluor Vinyl-Methyl Quality) silicone or FKM rubber so that it has a higher resistance to oil particles and hydrocarbons in suspension. Limitations Respect the work pressure established values. When the inner layer is made of VMQ or FVMQ gas oil and oil stains do not damage the tubes, but they should not be used to transport fuel or oil, nor be submerged in these liquids. Hoses with convolutions, ideally suited to resist tension and tightness of vibration at high temperatures. Corrugated inner and outer appearance, the outer is brown red color, the inner layer could be black or dark blue when is FVMQ, and black when it is FKM. Excellent flexibility during the assembly process. Highly resistant to hardening with very good compression characteristics, excellent resistance to thermal aging and oxidizing agents (oxygen, ozone, UV). The assembling of the external stainless steel rings guarantees the axial flexibility of the tubing even when under pressure, absorbing vibration between connected parts and avoiding tension and noise. Operational temperature range from -60°C (-75 F) to +200°C (392 F), it may reach up to 220°C (428 F) during short periods of time. When the inner layer is made of FKM the minimum working temperature could be lowered until 30°C (-22 F). The FKM inner layer is incompatible with ketones such as acetone.  This type of tube is not recommended for applications with negative pressure (vacuum). This product is not recommended for the transport of abrasive particles. Construction This reference could be manufactured with three variants: Regulations Silicone rubber used is in accordance with EU Directive 2002/95/ECC for Restriction of the use of hazardous substances (RoHS). Inner layer in VMQ Silicone. Inner layer in FVMQ Silicone. Inner layer in FKM Rubber. In each of them is manufactured with three aramide fabric reinforcements. Technical Specifications Inner Diameter Wall thickness Muff Length Total Length Contact your sales office for more information [email protected] –