Brochure Fuel Cells
8Pages

Fuel Cell CUSTOM MADE FLEXIBLE HOSES FOR FUEL CELLS APPLICATIONS WWW.VENAIR.COM

FUEL CELLS HOSES CUSTOM ENGINEERING SOLUTIONS The future of the mobility is in continuos development. Hybrid, electric motors and fuel cells systems are continuosly looking for new technologies. With our engineering and process know-how, we are bringing the transformation to the maturity required for series production. Venair develops custom solutions for the fuel cells industry, we present flexible hoses that adapt to the different requirements of the industry: High purity (Low leachables) Low permeability Low conductivity High level of cleanliness High flexibility High temperature...

FUEL CELLS HOSES CUSTOM ENGINEERING SOLUTIONS In close cooperation with our new and established customers, innovative development scenarios are being created. As an engineering partner, for years we have been supplying the industry when it comes to developing and implementing custom solutions for new applications. PERFORMANCE TESTS CUSTOMER NEEDS IDENTIFICATION VALIDATION Customer specifications Required tests Project planning MATERIAL AND TESTS PERFORMANCEPRODUCT DEVELOPEMENT VALIDATION Research and developement of materials Custom design and engineering services Prototypes production...

FUEL CELLS HOSES VENA® FUEL CELL Perfect solution for all the fuel cell lines Hybrid elastomer Venair’s R&D department presents a new material, VENA® FUEL CELL, an elastomer composite especially designed for the use in Fuel Cells. This material has been designed to fulfill the main requirements in Fuel Cell applications and contribute to the overall efficiency of these systems. The use of high purity and quality raw materials in VENA® FUEL CELL ensure the ultra-low content of leachable substances and component inertness in Fuel Cell ambient. The low permeability and mechanical properties of...

FUEL CELLS HOSES COMPARATIVE MATERIAL CHARTS High purity Method Standard: CFR (mg/cm2) Extractables level: *FKM does not swell in Hexane Low permeability Method Standard: ISO 15105-1/ astm d1434-82(2009)M (ml/m²,*day*atm) Permeability rate in a standard hose construction - 4.3mm Wall thickness / 3 textile reinforcements: Non-conductive Method Standard: 24h Test (µS/cm, per 24h) Mechanical properties Tensile strength Chemical resitance Compatability tests with DI water, hot air, coolants have been passed in the following conditions: FCELL High standard of Cleanliness Minimum level of...

MORE THAN HOSES MORE THAN HOSES Developing custom solutions since 1986 Our technical & engineering team is responsible for safeguarding the interests of our clients in designing the optimal product for each application. Together with the inventions that come out from our R&D department, we have developed and patented a wide range of products and we have more than 70 registered trademarks that support our innovative activity. We can produce different hoses and ducting solutions made of silicone and other materials such as other elastomer, thermoplastics and composites to fulfill every...

EUROPE VENAIR GMBH NORTH Emil-Figge-Strasse 80 44227 - Dortmund - GERMANY T: (+49) 0231 97424490 kontakt@venair.com VENAIR ÜRÜNLER Venair Silikon Ürünler Mühendislik Ltd. S ti. Görükle Mah. Fırat (490) ̧ Cad. 19A Nilüfer/Bursa TURKEY T: (+90) 850 224 7747 venairtr@venair.com VENAIR GMBH EAST Rhinstraße 84 D-12681 Berlin - Germany T: +49 (0) 30 549 865 06 kontakt@venair.com VENAIR LTD Unit 50, Gateway 49 Trade Park Kerfoot Street, Warrington WA2 8NT UNITED KINGDOM VENAIR GMBH SOUTH 71691 - Freiberg am Neckar Germany Ploiesti West Park DN 72, KM 8, VENAIR SARL Champ Perrier Parc du Grand Lyon...

s u d ni F www.venair.com Cerdanya, 26 - Pol. Ind. Nord 08226 - Terrassa - Spain IMPORTANT: Venair reserves the right to change, amend, modify, suspend, continue or terminate all or any part of this Brochure at any time without notice. It is the user’s responsibility to ensure the suitability and safety of the VENAIR products for all intended uses. All the tests must be conducted in accordance with applicable regulatory requirements in order to determine the safety and effectiveness for use of the hoses in any particular application.