*myaeroexpo

RV-14_55

Product catalog summary

Overview: This document provides detailed instructions for the routing and installation of the WH-00125 RV-14 Common Fuselage Harness in the aircraft. It includes specifications, connection details, and reference diagrams for the harness and its associated components.

Specifications: The WH-00125 drawing package begins with a production drawing that outlines the wire lengths, gauges, colors, and connections for the common harness. This drawing is best viewed digitally due to the extensive information it contains.

Installation Procedures: The document details the routing of the harness through various sections of the aircraft, including connections to the pilot and co-pilot control sticks, power outlets, and auxiliary music jacks. Specific sections of the aircraft, such as the left and right wings, tailcone, and flap systems, are referenced for detailed routing instructions.

Components and Connections: Key components include the pilot and co-pilot control sticks, power outlets, and optional LEMO jacks. The document specifies the hardware required for installation, which can be purchased separately from Van's Aircraft.

Figures and Diagrams: Several figures illustrate the routing and connections of the harness. Figure 1 provides a visual guide for the WH-00125 routing, while subsequent figures detail specific components like control sticks and power outlets.

Recommendations: It is recommended to view the production drawing on a computer for clarity and to ensure all connections and specifications are accurately followed during installation.

Catalog excerpts

SECTION 55: COMMON FUSELAGE HARNESS The following pages illustrate the routing and installation of the WH-00125 RV-14 Common Fuselage Harness in the aircraft. The information below is intended to clarify the organization of the WH-00125 drawing package (available on the Van's Aircraft website Downloads page). The first page in the WH-00125 drawing package is the production drawing for the WH-00125 harness. The production drawing provides the overall wire lengths, gauges, colors, and connections for the common harness. Due to the large amount of information displayed, the production drawing is best viewed on a computer. The remaining pages in the WH-00125 drawing package are included for reference and depict the various wire harnesses that connect to the WH-00125 harness. Explanatory notes are also provided. DATE OF COMPLETION: PARTICIPANTS: DATE: 05/17/16 REVISION:

Open the catalog to page 1

VAN'S AIRCRAFT, INC. EXTENDED LENGTH CO-PILOT CONTROL STICK GROUND CO-PILOT CONTROL STICK POWER OUTLET / AUX MUSIC JACK (SEE PAGE 55-04) FLAP MOTOR (SEE SECTION 34 FLAP ACTUATION SYSTEM) RIGHT WING (SEE SECTION 19 WING SYSTEMS ROUTING) CO-PILOT MIC / HEADPHONE FUEL PUMP (SEE SECTION 31 FUEL SYSTEM) LEMO JACK (OPTIONAL) RIGHT WING GROUNDS AN525-832R8 PILOT CONTROL STICK GROUND PILOT CONTROL STICK (SEE PAGE 55-03) FLAP POSITION (SEE SECTION 54 FLAP POSITION SENSOR) SB375-4 NOTE: The required hardware may be purchased separately from Van's. LEFT WING (SEE SECTION 19 WING SYSTEMS ROUTING) LEFT WING...

Open the catalog to page 2

VAN'S AIRCRAFT, INC. TO TAILCONE RIGHT 4X SB750-10 TO CO-PILOT CONTROL STICK / GROUND PILOT CONTROL STICK PILOT CONTROL STICK GROUND AN525-10R7 NAS1149F0332 MS21042-3 BOTH SIDES FIGURE 1: CONTROL STICKS

Open the catalog to page 3