V526B
2Pages

{{requestButtons}}

Catalog excerpts

V526B - 1

This valve is engineered for liquid or gas applications in the nuclear industry. Typical applications are feed water control systems, dump lines, make-up water, miscellaneous process systems, N2 systems, and monitoring/sampling systems. This design uses a balanced disc (poppet) which permits bidirectional flow and tight sealing in both flow directions. Extreme reliability is inherent due to rugged design, simplicity of operation, and a minimum number of moving parts. Isolation standoffs prevent excessive heat transfer to the solenoid operator. Internal parts are contoured to retard buildup of contamination and sludge. compact, lightweight design provides excellent resistance to seismic vibration and shock. A completely enclosed and encapsulated coil insures continuous operation during a LocA event. • Valve ratings: ANSI class 150 to 2500. • High Cycle life. Over 100,000 operations in most applications. • Resistant to contamination and sludge buildup. • ASME Section III, Classes 1, 2 and 3. • Available Fail Safe Closed, Fail Safe Open or Fail in Last Position (Latching). • Elastomer seats. • Elastomer dynamic seal. • Position indication switches available for remote status indication. • Solenoid and switch assemblies readily accessible for removal or maintenance without disturbing the pressure boundary. • Stress and seismic analysis available. • Radiation resistance: Standard, 2x10A8 rads. • Qualified life: Up to 60 years + LOCA. • Qualified to IEEE 323, 344, 382 • 2-Piece SS Housing © 2016 VALCOR ENGINEERING CORPORATION PH: 973-467-8400 FX: 973-467-9592 WWW.VALCOR.COM

Open the catalog to page 1
V526B - 2

SOLENOID VALVE SERIES V526B TYPICAL DIMENSIONS OF A 1” VALVE (With Position Switches) Valve ASME B&PV, Section III Class 1, 2, & 3, B16.34, B31.1 Solenoid Operator Class H materials or better. 120, 220, 240, 380 VAC or 24, 48, 125, 250 VDC. Electronic Components Totally enclosed. Meets minimum of NEMA 4 or better. Qualified to IEEE 323. Line Connection Standard: Socket weld Optional: Butt Weld or Tube Extensions Body Material Standard: Stainless Steel Optional: Carbon Steel Qualification IEEE 323 -- 1974, 1983, and later editions IEEE 344 -- 1975, 1987, and later...

Open the catalog to page 2

All VALCOR ENGINEERING CORPORATION catalogs and technical brochures

  1. V522-7010

    1 Pages

  2. SV525

    2 Pages

  3. SV515

    2 Pages

  4. SV91

    2 Pages

  5. SV97

    2 Pages

  6. SV95

    2 Pages

  7. V526G

    2 Pages

  8. V526P

    2 Pages

  9. V526D

    2 Pages

  10. V19800

    2 Pages

  11. V5000

    2 Pages

  12. SV61/62

    2 Pages

  13. SV11/12

    2 Pages

  14. V14500

    2 Pages

  15. V4700

    2 Pages

  16. V3400

    2 Pages

  17. V70900

    2 Pages