V70900-98 3-way, Direct Acting, Solenoid Valve Valcor Nuclear - Low Flow Air Pilot Valve Valcor Nuclear has created this compact size and low weight 3-way, direct acting, nuclear-qualified solenoid valve, to be used primarily as an air pilot control valve in nuclear power plants. It has been designed specifically to prevent the chronic operational problems associated with conventional solenoid valves currently installed in many PWR, BWR and CANDU plants. V7090098 is ideal for use in host of safetyrelated, low flow solenoid valve applications. Its cool running, single coil design is both highly reliable and adaptable, offering significant improvements for a variety of applications. The versatility of Valcor’s 70900-98 valve allows for a variety of configurations, including 2-way (one port plugged), normally closed, normally open and universal modes, with AC or DC voltages. Its principal function is pressurizing and venting pneumatic diaphragm actuator or air cylinders under extremely harsh environmental conditions, including chemical spray. • Compact size and low weight • Rugged construction • Direct acting, with no diaphragm or dynamic O-ring seals (O-rings are used for static seals only) • Universal operation– normally open, normally closed, selector or diverter modes feasible with same design. • Internal flow path sealing by stainless steel poppets on Vespel polyimide seats. • Brass is standard; also available in aluminum and stainless steel. • Mounting brackets available as an option • Solenoid enclosure is all stainless steel, seal welded construction for NEMA-4, -7 compliance (Water tight and explosion proof) • Class H Insulation • Requires less than 10 watts of power; cool running/potted coil design. • Can be mounted in any position © 2016 VALCOR ENGINEERING CORPORATION

flow ensures Lower power (10 watts) con permits continuous, cool running operation Welded solenoid vesper seat provides Direct-acting poppet ensuring rugged operation without SpecificationsOperating Pressure and Flow Ratings Operating Modes Normally Open/Closed NO and NC Electrical Data Voltage 48 VDC, 100 VAC, 125 VDC Electrical Connector 36” leads