va-Q-vip B
3Pages

Product Data Sheet Characteristics va-O-vip B is a vacuum insulation panel for construction applications. va-O-vip B is covered in a high barrier film and an additional black glass fibre textile for mechanical shock protection. va-O-vip B with black glass fabric is standardly flammable (construction materials class DIN 4102-B2). va-O-vip B is approved for general construction purposes in accordance with approval number Z-23.11-1658 of the "Deutsches Institut fur Bautechnik (DIBT)". On July 1st 2015 the validity of this approval was extended until June 30th 2020. va-O-vip B elements are unique because of their rectangular edges and corners. This is due to the special edge folding technique "va-O-seam". Individual elements can be joined together almost seamlessly. Applications va-O-vip B can be used in buildings in areas Like interior applications for ceilings, walls, floors, flat roofs, top floor ceilings, exterior insulation behind panelling or insulation in wood frame constructions according to standard DIN 4108-10, Table 1. Developers, installation partners or architects should supervise the specific insulation system. Application systems for buildings can also be discussed directly with va-O-tec. Advantages • Official approval for building material with assigned thermal conductivity 0.007 W/mK • Significantly reduced heat flows and thickness • Saves space, providing Larger usable area • Extra protective Layer for reliable installation Product Data

ALWAYS THE RIGHT TEMPERATURE 0.0043 W/(mK) at 20 mm thickness (initial value) (£ 20 mm Thermal conductivity - initial value thickness)

* For panels of 10 mm and 15 mm thickness a part of the side flap will rest on the panel surface. All data provided pertains to approximate values and are not meant for the construction of specifications. Quality is controlled through our patented va-Q-check system.