va-Q-vip F Product Data Sheet Characteristics va-Q-vip F is a vacuum insulation panel for construction applications. The core itself is non-combustible (fire class A1), va-Q-vip F is inflammable (Construction materials class DIN 4102-B2 / EN13501-1). va-Q-vip F is approved for general construction purposes in accordance with the approval number Z-23.11-1658 and ETA-17/0926, of the "Deutsches Institut für Bautechnik (DIBT)". By 1st July 2015 the validity of the approval was extended until 30th June 2020. va-Q-vip F elements stand out because of their smooth edges and corners due to special "edge fold technique va-Q-seam" individual elements can therefore be joined almost seamlessly. Application va-Q-vip F can be used in buildings in accordance with application areas interior applications for ceilings, walls, floors, flat roofs, top floor ceilings, exterior insulation behind paneling, insulation in wood frame construction to the standard DIN 4108-10, Table 1. Planners, installation partners or architects are responsible for the relevant specific insulation system. Application systems for buildings can also be discussed directly with va-Q-tec. Advantage Official approval for building material with assigned thermal conductivity 0.007 W/mK Significantly reduced heat flows and thickness Saves space providing more larger usable room area Product Data Surface color Outer appearance Rectangular shape (without protruding flanges*)

ALWAYS THE RIGHT TEMPERATURE

ALWAYS THE RIGHT TEMPERATURE * For 10 mm and 15 mm thickness, if a flat edge is required, the flanges are refolded onto the main surface of panel. ALL figures are intended as a guide and should not be used for preparing specifications. Quality and gaspressure control by patented "va-O-check" measurement device.