va-Q-vip F-GGM

Product catalog summary

Product Overview
va-Q-vip F-GGM is a vacuum insulation panel designed for construction applications, featuring rubber granulate lamination. It is non-combustible and classified as inflammable under DIN 4102-B2. The product is approved for general construction use by the Deutsches Institut für Bautechnik (DIBT) with approval number Z-23.11-1658, valid until June 30, 2020. The panels are noted for their smooth edges due to the 'va-Q-seam' edge folding technique, allowing seamless joining of individual elements.

Applications
The panels are suitable for various building applications, including interior ceilings, walls, floors, flat roofs, and exterior insulation. They are particularly designed for flat roofs, terraces, and floors. Compliance with DIN 4108-10 standards is required, and consultation with va-Q-tec is recommended for specific application systems.

Advantages
The product offers official approval with a thermal conductivity of 0.007 W/mK, reduced heat flows, space-saving benefits, and an extra protective layer for reliable installation.

Product Data

Surface Color: Silver/black
Density: 180 to 210 kg/m³ for > 10 mm, 180 to 250 kg/m³ for ≤ 10 mm
Thermal Conductivity: Initial value < 0.0043 W/(mK) at 20 mm thickness; Rated value 0.0070 W/(mK) for > 20 mm thickness
Temperature Stability: -70 °C to +80 °C, temporarily 120 °C for 30 min
Humidity Stability: 0% to 60%
Standard Dimensions: 1000 mm x 600 mm and 500 mm x 600 mm
Thickness: 10 mm to 40 mm
Compressive Strength: Approx. 150 kPa at 10% compression
Service Life: Up to 60 years depending on application
Flammability: DIN 4102, B2

Additional Information
The panels are available in special shapes such as triangles and trapeziums, with a lamination tolerance of +2 mm. For 10 mm and 15 mm thickness, flat edges can be achieved by refolding flanges onto the main surface.

Catalog excerpts

Product Data Sheet Characteristics va-O-vip F-GGM is a vacuum insulation panel with rubber granulate Lamination for construction applications. The core itself is non-combustibLe (fire class Al), va-O-vip F-GGM is inflammable (construction materials class DIN 4102-B2). va-O-vip F is approved for general construction purposes in accordance with approval number Z-23.11-1658, of the "Deutsches Institut fur Bautechnik (DIBT)". On 1st July 2015 the validity of the approval was extended until June 30th 2020. va-O-vip F-GGM elements stand out because of their smooth edges and corners. This is due to the special edge folding technique "va-O-seam". Individual elements can therefore be joined together almost seamlessly. Applications va-O-vip F-GGM can be used in buildings in areas Like interior applications for ceilings, walls, floors, flat roofs, top floor ceilings, exterior insulation behind panelling or insulation in wood frame construction to the standard DIN 4108-10, Table 1. Developers, installation partners or architects should supervise the relevant specific insulation system. Application systems for buildings can also be discussed directly with va-O-tec. va-O-vip F-GGM was designed especially for its application on flat roofs, terraces and floors. Advantages • Official approval for building material with assigned thermal conductivity 0.007 W/mK • Significantly reduced heat flows and thickness • Saves space, providing Larger usable area • Extra protective Layer for reliable installation Product Data va-O-vip F-GGM

Open the catalog to page 1