Product Data Sheet Characteristics va-O-vip F-EPS is a vacuum insulation panel with EPS Lamination for construction applications. The core itself is non-combustibLe (fire class Al), va-O-vip F-EPS is inflammable (construction materials class DIN 4102-B2). va-O-vip F is approved for general construction purposes in accordance with approval number Z-23.11-1658, of the "Deutsches Institut fur Bautechnik (DIBT)". On July 1st 2015 the validity of the approval was extended until June 30th 2020. va-O-vip F-EPS elements stand out because of their smooth edges and corners. This is due to the special edge folding technique "va-O-seam". Individual elements can therefore be joined together almost seamlessly. Applications va-O-vip F-EPS can be used in buildings in areas Like interior applications for ceilings, walls, floors, flat roofs, top floor ceilings, exterior insulation behind panelling or insulation in wood frame construction to the standard DIN 4108-10, Table 1. Developers, installation partners or architects should supervise the relevant specific insulation system. Application systems for buildings can also be discussed directly with va-O-tec. Advantages • Official approval for building material with assigned thermal conductivity 0.007 W/mK • Significantly reduced heat flows and thickness • Saves space, providing Larger usable area • Extra protective Layer for reliable installation Product Data Thermal conductivity - initial value < 0.0043 W/(mK) at 20 mm thickness (measured value) va-O-vip F-EPS

ALWAYS THE RIGHT TEMPERATURE Lamination with extruded polystyrene on one side or double sided va-O-vip F-EPS

* For 10 mm and 15 mm thickness, if a flat edge is required, the flanges are refolded onto the main surface of panel. Hint Thickness of lamination: 10 mm Thermal conductivity at 10 mm thickness: 0,040 W/(mK) va-Q-vip F-EPS