*myaeroexpo

va-Q-vip B

Product catalog summary

Product Overview
va-Q-vip B is a vacuum insulation panel designed for construction applications. It features a high barrier film and a black glass fibre textile for mechanical shock protection. The panel is classified as flammable under DIN 4102-B2 and is approved for general construction use by the Deutsches Institut für Bautechnik (DIBT) with approval number Z-23.11-1658, valid until June 30, 2020. The unique rectangular edges and corners are achieved through the va-Q-seam edge folding technique, allowing seamless joining of individual elements.

Applications
va-Q-vip B is suitable for various building applications, including interior ceilings, walls, floors, flat roofs, top floor ceilings, exterior insulation behind paneling, and wood frame constructions as per DIN 4108-10, Table 1. It is recommended that developers, installation partners, or architects oversee the specific insulation system, and discussions with va-Q-tec are encouraged for building application systems.

Advantages

Officially approved building material with a thermal conductivity of 0.007 W/mK.
Reduces heat flows and thickness, saving space and providing a larger usable area.
Includes an extra protective layer for reliable installation.

Product Data

Surface color: Black
Outer appearance: Rectangular shape without flanges
Density: 180 to 210 kg/m³ for > 10 mm, 180 to 250 kg/m³ for ≤ 10 mm
Thermal conductivity: Initial value of 0.0043 W/(mK) at 20 mm thickness; rated value of 0.0070 W/(mK) from 20 mm thickness and 0.0080 W/(mK) for 10-15 mm thickness; with ventilation 0.020 W/(mK)
Temperature stability: -70 °C to +80 °C, temporary 120 °C for 30 min
Thermal shock resistance: Insensitive to heat & cold shock
Humidity stability: 0% to 70%
Internal gas pressure: < 5 mbar at delivery, increasing approx. 1 mbar/year
Standard dimensions: I: 1000 mm x 600 mm, II: 500 mm x 600 mm
Special shapes: Triangle, trapezoid, corner cut, recessed surface, panel with hole, flanges folding by 10 mm / 15 mm thickness
Thickness: 10 to 50 mm
Length tolerance: 0 to 500 mm: +2 / -4 mm, 501 to 1000 mm: +2 / -5 mm
Thickness tolerance: ± 5%
Specific heat capacity: 0.8 kJ/(kg·K) at room temperature
U-value: Initial value of 0.22 W/(m²K) at 20 mm thickness; rated value of 0.35 W/(m²K) at 20 mm thickness
Mass per area: 3.5 – 5 kg/m² for 20 mm thickness
Compressive strength: Approx. 150 kPa at 10% compression
Service life: Up to 60 years depending on application
Flammability: B2 according to DIN 4102

Additional Information
For panels of 10 mm and 15 mm thickness, a part of the side flap will rest on the panel surface. All data provided are approximate values and not intended for specification construction. Quality is controlled through the patented va-Q-check system.

Catalog excerpts

Product Data Sheet Characteristics va-O-vip B is a vacuum insulation panel for construction applications. va-O-vip B is covered in a high barrier film and an additional black glass fibre textile for mechanical shock protection. va-O-vip B with black glass fabric is standardly flammable (construction materials class DIN 4102-B2). va-O-vip B is approved for general construction purposes in accordance with approval number Z-23.11-1658 of the "Deutsches Institut fur Bautechnik (DIBT)". On July 1st 2015 the validity of this approval was extended until June 30th 2020. va-O-vip B elements are unique because of their rectangular edges and corners. This is due to the special edge folding technique "va-O-seam". Individual elements can be joined together almost seamlessly. Applications va-O-vip B can be used in buildings in areas Like interior applications for ceilings, walls, floors, flat roofs, top floor ceilings, exterior insulation behind panelling or insulation in wood frame constructions according to standard DIN 4108-10, Table 1. Developers, installation partners or architects should supervise the specific insulation system. Application systems for buildings can also be discussed directly with va-O-tec. Advantages • Official approval for building material with assigned thermal conductivity 0.007 W/mK • Significantly reduced heat flows and thickness • Saves space, providing Larger usable area • Extra protective Layer for reliable installation Product Data

Open the catalog to page 1

ALWAYS THE RIGHT TEMPERATURE 0.0043 W/(mK) at 20 mm thickness (initial value) (£ 20 mm Thermal conductivity - initial value thickness)

Open the catalog to page 2

* For panels of 10 mm and 15 mm thickness a part of the side flap will rest on the panel surface. All data provided pertains to approximate values and are not meant for the construction of specifications. Quality is controlled through our patented va-Q-check system.

Open the catalog to page 3

va-Q-vip B

va-Q-vip B

Catalog excerpts

All Va-Q-tec AG catalogs and technical brochures