PRODUCT SHEET Removable ONE50EVO A single high-security ONE50EVO removable bollard can withstand the impact of one truck travelling at 80 km/h. The ONE50EVO high-security removable bollard is designed to protect strategic access points and sensitive sites from terrorist attacks. Its removable bollard head system enables to open the access point occasionally. The removable system is an excellent solution to complete the closing of an access already equipped with one or several automatic bollards. (the access can be fully open, occasionally) Characteristics Dimensions (mm) : Ø325 H1000 (above ground) Material: high-strength steel Treatment: hot-dip galvanising of the bollard Total weight: 760 kg The ONE50EVO bollard structure is based on the retractable version, without the hydraulic system, which makes it as resistant as a retractable bollard. The bollard head is installed into a specific casing. To open the access, the bollard head shall be removed from the casing, using a boom truck (weight to lift: 450 kg), and moved to the storage location. A runway cover and a embossed closing plate are installed at the bollard head’s place. Then, vehicles can run safely. Equivalent to : IWA 14-1:2013 Bollard V/7200[N3C]/80/90* Impact energy : 1 778 kJ * Equivalence : DOS K12 Intellectual property of URBACO – Copying forbidden – Specifications not contractually binding - Changes may be made without prior notice - Most of the models shown are patented. URBACO S.A – a limited liability company with a capital of 1.5 M€ - Siret 33944567800032 R.C.S. AVIGNON 1999 B 40308 – VAT: FR 06 339 445 678

PRODUCT SHEET Removable ONE50EVO High-security Bollard cladding The ONE50EVO bollard is equipped with an innovative interchangeable sleeve system that allows you to customise the appearance of the access points and repair damaged heads in under 5 minutes. Painted sleeve Stainless steel sleeve Material: steel Treatment: zinc-based primer as standard reinforcing corrosion-resistance RAL paint: Matt finish thermosetting polyester powder top coat (RAL3020 standard) Material: 316L Stainless Steel Treatment: polish and satin-finished Customized sleeve Material: steel (stainless on request) Treatment...