Globus GSF 245 is a robust and produc ve V-snow blower suitable for tractors from 100 hp. The blower is supplied with a fixed three-point hitch. Globus GSF 245 has a symmetrical funnel-shaped fan housing with the fan sha posi oned in the centre of the blower. Such design allows snow to easily flow into the fan, thereby increasing the blower's capacity. The fan sha is equipped with 6 hardened and hinged intake blades, each fi ed with grease nipples. These blades direct the snow into the fan, and the hinged design ensures that the blades move away from foreign objects, reducing the risk of damage to the blower. The discharge fan has a diameter of 85 cm and is designed to provide op mal throw distance. The chute has a rounded shape, which facilitates the passage of snow. It is also equipped with a swivel motor and an adjustable deflector flap, allowing snow to be directed as desired. The chute is foldable, providing easy access for maintenance. Hydraulic swing and deflec on are

Norsk produsert kvalitets utstyr laget for long levetid Made of DOMEX 650 and high-quality steel. Adr.: Torlandsvegen 3, 4365 Naerbo Org.nr.: 972420026 E-post: [email protected] Tlf.: 51 79 19 00

Wear blades and skids Wear plates R+L (127623),10mm, HARDOX 500 Wear entry blade (127622), 10mm, HARDOX 500 Wear skid front (126510) Wear skid rear (130114)

Norsk produsert kvalitets utstyr laget for long levetid - with 3-point hitch, only towing - the chute with hydraulic swing and folding are standard, allowing the snow to be thrown in the desired direction Adr.: Torlandsvegen 3, 4365 Naerbo Org.nr.: 972420026 E-post: [email protected] Tlf.: 51 79 19 00

Hardox in my body® “A product that uses Hardox® wear plate to perform better, carry more payload, weigh less and last longer” – SSAB*. * SSAB is a Nordic and US-based steel company. SSAB offers value added products and services developed in close cooperation with its customers to create a stronger, lighter and more sustainable world. SSAB has employees in over 50 countries. SSAB has production facilities in Sweden, Finland and the US. SSAB is listed on Nasdaq Stockholm and has a secondary listing on Nasdaq Helsinki. www.ssab.com High performance. Longer service life. The combination of hardness...

Norsk produsert kvalitets utstyr laget for long levetid Technical data GSF 245 Model

Norsk produsert kvalitets utstyr laget for long levetid Additional optionsEdge cutter R and L Edge cutter right side (128078), hight 170cm, plus 20cm of working width from right side. Edge cutter right side (128079), hight 170cm plus 20cm of working width from left side. HARDOX 500. Snow deflector plate edge cutter R and L Snow deflector plate edge cutter (127645) from right side, 5mm thick. Can only be used with the edge cutter (128078). Snow deflector plate edge cutter (127686) from left side, 5mm thick. Can only be used with the edge cutter (128079).

Norsk produsert kvalitets utstyr laget for long levetid Front two wheels (124949), sized 125/75-R with continuous adjustment. If the wheel sinks into the snow, it works in combination with the skid shoe, providing support for the blower. Skids set Front two skids set (129940) Edge knife R, Edge knife L Edge cutter right side (127965). Hight 140cm. DOMEX 420, 8mm thick. Edge cutter left side (127966). Hight 140cm. DOMEX 420, 8mm thick.

Toolbox (127962), mounted on chassis. Light set The side marker lights (127971) are supplied complete with a connector. (127974) is supplied with a cable, complete with pressed-on pins for a Deutch connector. Adr.: Torlandsvegen 3, 4365 Naerbo Org.nr.: 972420026 E-post: [email protected] Tlf.: 51 79 19 00

Norsk produsert kvalitets utstyr laget for long levetid The 36 months warranty covers the repair of defects and faults in the Snow Blower or its components. This includes faults that can be traced back to manufacturing or material defects. The warranty does not cover wear parts, including the PTO shaft and damages due to improper use or failure to follow the instructions in the user manual. At least one service must be performed at the dealer every year. This service must be carried out before the season, and no later than September 15th. For more information, please read User Manual or contact...