Heated Pitot Static


Catalog excerpts

Heated Pitot Static - 1

■ Lightest commercially available Heated Pitot-Static Probe ■ 58 grams total weight ■ 19 W continuous power ■ Heated ports with temperature control system ■ Fault detection signal output ■ Reverse polarity protection UAV Factory's heated Pitot-Static Tube is the lightest and most power efficient commercially available probe for small unmanned aircraft vehicles (UAV). Manufactured from carbon fiber and aircraft grade aluminum, this probe provides both dynamic and static pressure measurements in a single ultra-light and rigid package. The simple mechanical interface allows quick removal. The combined dynamic and static port heating system is fully integrated into the tube which allows for minimal power consumption. An onboard feedback controller continuously regulates the temperature of the probe and automatically switches off the heating element when the required temperature is reached. An additional signal output monitors the heating systems and detects fault conditions. UAV Factory USA LLC 50 South Buckhout Street Irvington, NY 10533 USA Phone: +1 (914) 591 3070 Fax: +1 (914) 591 3715 sales@uavfactory.com

Open the catalog to page 1
Heated Pitot Static - 2

Electrical Specifications: Parameter Electrical Heater Features: The Pitot-Static heater is regulated by an integrated control board. The probe is equipped with a status output signal to detect fault conditions in case of device failure, power loss, or temperature fall below the critical level. The status signal has a +5 V logic level which indicates no fault condition, 0 V logic level indicates one of the fail states described above. The probe is protected by a 2 A fuse and has three connection wires: red (+12 V; input), black (GND) and yellow (+5 V; status signal output). Pitot-Static...

Open the catalog to page 2

All UAV Factory Ltd. Europe catalogs and technical brochures