Exhibit with us
*myaeroexpo  
English
  1. Catalogs
  2. TUNGSTENTOOLS ITALIA s.r.l.
  3. TMS 200 / TMS 200 M1 / TMS 200 M2
video corpo

TMS 200 / TMS 200 M1 / TMS 200 M2

TMS 200 / TMS 200 M1 / TMS 200 M2
1 / 1 PageView full catalog

TMS 200 / TMS 200 M1 / TMS 200 M2

Product catalog summary
Overview: The document provides technical specifications for TMS 200 contouring cutters, designed for machining composite materials, non-ferrous metals, Plexiglas, and Polycarbonate. These cutters are made from solid carbide with a 10% cobalt micro grain composition and are available with or without a front cut.
Specifications:
  • Material: Solid carbide with 10% Co micro grain.
  • Application: Suitable for composite (CRFP) materials, non-ferrous metals, Plexiglas, and Polycarbonate.
  • Types: Available as contouring cutters without front cut and with front cut (multicut).
Dimensions:
  • Length (L): Ranges from 40 mm to 83 mm.
  • Diameter (d): Ranges from 3.00 mm to 12.00 mm.
  • Shank Diameter (h10): Ranges from 10 mm to 32 mm.
  • Cutting Length (l): Ranges from 3.00 mm to 12.00 mm.
Product Codes:
  • Without front cut: TMS200-0300 to TMS200-1200.
  • With front cut (M1): TMS200M1-0300 to TMS200M1-1200.
  • With front cut (M2): TMS200M2-0300 to TMS200M2-1200.
See more

Catalog excerpts

TMS 200 / TMS 200 M1 / TMS 200 M2-1

TMS 200 Countouring Cutters Countouring cutters without front cut (composite materials) Solid carbide grades: 10% Co Micro grain Application groups: Countouring cutters for machining composite (CRFP) materials, non ferrous, Plexiglas and Polycarbonate materials. Available with or without end cut. TMS 200 M1 Countouring Cutters Countouring cutters with front cut, multicut (composite materials) Solid carbide grades: 10% Co Micro grain Application groups: Countouring cutters for machining composite (CRFP) materials, non ferrous, Plexiglas and Polycarbonate materials. Available with or without end cut. ___MICRO GRAIN TMS 200 M2 Countouring Cutters Countouring cutters with front cut (composite materials) Solid carbide grades: 10% Co Micro grain Application groups: Countouring cutters for machining composite (CRFP) materials, non ferrous, Plexiglas and Polycarbonate materials. Available with or without end cut.

 Open the catalog to page 1

All TUNGSTENTOOLS ITALIA s.r.l. catalogs and technical brochures

  1. TM TI 7CR
    TM TI 7CR

    1  Page

  2. TM 3TK-HPC ALU / TM 3CK-HPC ALU
    TM 3TK-HPC ALU / TM 3CK-HPC ALU

    1  Page

  3. One shot drill/reamertool Z=3
    One shot drill/reamertool Z=3

    1  Page

  4. TM 3T-HPC ALU
    TM 3T-HPC ALU

    1  Page

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.