*myaeroexpo

TM TI 7CR

Product catalog summary

Overview: This document provides technical specifications for end mills designed for aerospace applications, focusing on high-performance cutting tools suitable for materials like Inconel and titanium alloys.

Specifications:

End Mill Types: 7-flute HCP 38° solid carbide end mills with corner radius.
Solid Carbide Grades: Micro grain 0.5 µ.
Diameter (D): Available in 12.00 mm, 16.00 mm, and 20.00 mm.
Length (L): Corresponding lengths are 83 mm, 92 mm, and 104 mm.
Shank Diameter (d): 32 mm for 12.00 mm and 16.00 mm end mills, 52 mm for 20.00 mm end mills.
Corner Radius (cr): Ranges from 0.5 to 4.0 mm depending on the end mill size.

Applications:

Designed for high removal rates and vibration-free cutting.
Suitable for Inconel 625 and 718, and titanium alloys Ti-6Al-4V.
Features unique side and profile milling geometry for enhanced performance.

Product Codes: Each end mill type is identified by a specific code, such as TM TI7CR-12R0.5, indicating the diameter and corner radius.

Recommendations: These end mills are recommended for aerospace applications requiring precision and efficiency in cutting high-strength materials.

Catalog excerpts

cr d 7-flutes HCP 38° solid carbide end mills with corner radius Solid carbide grades: Micro grain 0,5 |j Application groups: Inconel 625 and 718 and titanium alloys Ti-6Al-4V High removal rates, vibration free cutting, unique side and profile milling geometry.

Open the catalog to page 1

TM TI 7CR

TM TI 7CR

Catalog excerpts

All TUNGSTENTOOLS ITALIA s.r.l. catalogs and technical brochures