Exhibit with us
*myaeroexpo  
English
  1. Catalogs
  2. TUNGSTENTOOLS ITALIA s.r.l.
  3. TM 3TK-HPC ALU / TM 3CK-HPC ALU
video corpo

TM 3TK-HPC ALU / TM 3CK-HPC ALU

TM 3TK-HPC ALU / TM 3CK-HPC ALU
1 / 1 PageView full catalog

TM 3TK-HPC ALU / TM 3CK-HPC ALU

Product catalog summary
Overview: This document provides technical specifications for high-performance cutting (HPC) end mills designed for aerospace aluminum applications. These tools feature side coolant holes and are suitable for cutting various types of aluminum and non-ferrous metals.
Specifications:
  • Material: Solid carbide grades, specifically K10 micro grain with a grain size of less than 0.5µ.
  • Design: End mills with 3 cutting edges, 3 side coolant holes, and an irregular division. They have a special shank execution h5 that is super finished, with super lapped chip flutes.
  • Application Groups: Suitable for aluminum, die-cast aluminum, aircraft aluminum, non-ferrous metals, and plastics.
  • Optional Standard: DIN 6535 HB available upon request.
Dimensions:
  • Diameter (d): Available in sizes 6.00 mm, 8.00 mm, 10.00 mm, 12.00 mm, 16.00 mm, and 20.00 mm.
  • Length (l1 and L): Varies according to the diameter, with specific lengths provided for each size.
  • Shank Diameter (D): Corresponds to the diameter sizes, with a tolerance of h5.
  • Number of Flutes (Z): Consistently 3 across all sizes.
Product Codes: Each size and specification combination is associated with a unique product code for easy identification and ordering.
Additional Features: The document also mentions toroidal end mills with similar specifications, emphasizing their suitability for milling aluminum and aircraft aluminum.
See more

Catalog excerpts

TM 3TK-HPC ALU / TM 3CK-HPC ALU-1

TM 3TK-HPC ALUEnd mills with side coolant holes for aerospace Alu applications HPC Alu ZrN, high performance cutting, end milling cutters with side coolant holes and super lapped chip flutes, suitable for cutting Aluminium Solid carbide grades: K10 micro grain < 0,5^ Application groups: aluminium, die-cast aluminium, aircraft aluminium, non ferrous metals, plastics 3 cutting edges, 3 side coolant holes, irregular division, special shank execution h5 super finished, super lapped chip flutes On request: DIN 6535 HB TM 3CK-HPC ALUEnd mills with side coolant holes for aerospace Alu applications HPC-Torodial end mills with side coolant holes and super lapped chip flutes, suitable for milling Aluminium and aircraft Aluminium Solid carbide grades: K10 micro grain < 0,5^ Application groups: aluminium, die-cast aluminium, aircraft aluminium, non ferrous metals, plastics 3 cutting edges, 3 side coolant holes, irregular division, special shank execution h5 super finished, super lapped chip flutes On request: DIN 6535 HB

 Open the catalog to page 1

All TUNGSTENTOOLS ITALIA s.r.l. catalogs and technical brochures

  1. TM TI 7CR
    TM TI 7CR

    1  Page

  2. TMS 200 / TMS 200 M1 / TMS 200 M2
    TMS 200 / TMS 200 M1 / TMS 200 M2

    1  Page

  3. One shot drill/reamertool Z=3
    One shot drill/reamertool Z=3

    1  Page

  4. TM 3T-HPC ALU
    TM 3T-HPC ALU

    1  Page

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.