1. Catalogs
  2. TT ELECTRONICS
  3. Liquid Low Flow Alarm - Platon

Liquid Low Flow Alarm - Platon

Liquid Low Flow Alarm - Platon

Liquid Low Flow Alarm - Platon

Product catalog summary
Overview: The Platon Flow Alarm Type LF is designed for detecting low liquid flow or flow failure in systems such as cooling systems, water heaters, and lubrication systems. It features a rugged sensor with a simple electrical reed switch output, suitable for vertical installation with upward flow.
Specifications:
  • Available in ½" and ¾" line sizes with BSP female threaded connections.
  • Alarm rates are factory set between 0.5 L/min and 10 L/min.
  • Constructed from brass or stainless steel, with no glands or seals to prevent leaks.
  • Pressure rating up to 70 bar and temperature rating from -20 to +105°C.
  • Electrical output via an encapsulated external reed switch, normally closed contact, open circuit for low flow alarm.
  • Switch rating: 300V, 500mA, 10W for resistive loads.
Applications: Suitable for water supply flow failure alarms in heaters or boilers, lubricant or cutting fluid flow failure in machine tools or gearboxes, and cooling circuits in X-ray equipment, electron microscopes, transformers, radio transmitters, and high-frequency generators.
Features:
  • Low-cost flow alarm with simple, rugged construction.
  • Selectable alarm trip level, factory set.
  • No glands or seals, reducing potential leak points.
  • Special OEM versions available upon request.
Flow Ranges: The flow trip levels for different models are specified, ranging from 0.5 L/min to 10.0 L/min, with typical hysteresis of ±5% and accuracy of ±10%.
Options: Variations in materials or for alternative liquids or gases are available. For switching inductive circuits or high currents, a slave relay module is recommended.
Dimensions: Detailed dimensions are provided for different models, emphasizing the need for vertical installation with upward flow direction.
Contact Information: Roxspur Measurement & Control Ltd, Sheffield, England. Tel: +44(0)114 244 2521, Email: [email protected]
See more

Catalog excerpts

Liquid Low Flow Alarm - Platon-1

an Electronics a aB Make Possible / \ Platon Flow Alarm Type LF For liquid low flow or flow failure alarm on cooling systems, water heaters or lubrication systems, the Platon LF flow switch is a rugged sensor with simple electrical reed switch output. Installed in a vertical line with flow upwards, normal flows lift the float in the sensor. A magnet encapsulated in the float then actuates a reed switch, giving contact closure. Should the flow drop to below the preset alarm level, the float falls to the rest position and the contacts open to give an alarm output. The Model LF is available in %" and %" line sizes, with BSP female threaded connections. Alarm rates are factory set between 0.5 L/min and 10 L/min, to suit most applications. The standard unit is in brass, and has a one piece body suitable for high pressures, with no glands or seals to leak. The externally mounted reed switch has flying leads for local connection to a terminal block. Typical applications are for water supply flow failure into heaters or boilers, where the flame or power supply is cut to prevent overheating accidents, for lubricant or cutting fluid flow failure in machine tools or gearboxes. For flow failure alarm in cooling circuits, the LF flowswitch is used on X-ray equipment, electron microscopes, transformers, radio transmitters and high frequency generators. / \ Features • Low cost flow alarm • Simple rugged construction • Brass or Stainless Steel, BSP connections • Selectable alarm trip level (factory set) • No glands or seals • Other special OEM versions available

 Open the catalog to page 1
Liquid Low Flow Alarm - Platon-2

The flow trip level set on water for the different models is as follows: Connection K" BSP K" BSP K" BSP K" BSP K" BSP K" BSP K" BSP K" BSP %" BSP %" BSP %" BSP %" BSP Typical hysteresis between on/off Typical accuracy of trip point Specification Body Material Flow Sensor Electrical Output Switch Function Switch Rating Lead Length Pressure Rating Temperature Rating Pipe Connections LFB: Brass (CZ121) LFS: Stainless Steel LFB: Brass with encapsulated magnet LFS: Stainless Steel with encapsulated magnet in epoxy resin Encapsulated external reed switch Normally closed contact. Open circuit for...

 Open the catalog to page 2
*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.